diff --git a/api-extractor.json b/api-extractor.json
new file mode 100644
index 000000000..fa4c97871
--- /dev/null
+++ b/api-extractor.json
@@ -0,0 +1,382 @@
+/**
+ * Config file for API Extractor.  For more info, please visit: https://api-extractor.com
+ */
+{
+	"$schema": "https://developer.microsoft.com/json-schemas/api-extractor/v7/api-extractor.schema.json",
+
+	/**
+	 * Optionally specifies another JSON config file that this file extends from.  This provides a way for
+	 * standard settings to be shared across multiple projects.
+	 *
+	 * If the path starts with "./" or "../", the path is resolved relative to the folder of the file that contains
+	 * the "extends" field.  Otherwise, the first path segment is interpreted as an NPM package name, and will be
+	 * resolved using NodeJS require().
+	 *
+	 * SUPPORTED TOKENS: none
+	 * DEFAULT VALUE: ""
+	 */
+	// "extends": "./shared/api-extractor-base.json"
+	// "extends": "my-package/include/api-extractor-base.json"
+
+	/**
+	 * Determines the "<projectFolder>" token that can be used with other config file settings.  The project folder
+	 * typically contains the tsconfig.json and package.json config files, but the path is user-defined.
+	 *
+	 * The path is resolved relative to the folder of the config file that contains the setting.
+	 *
+	 * The default value for "projectFolder" is the token "<lookup>", which means the folder is determined by traversing
+	 * parent folders, starting from the folder containing api-extractor.json, and stopping at the first folder
+	 * that contains a tsconfig.json file.  If a tsconfig.json file cannot be found in this way, then an error
+	 * will be reported.
+	 *
+	 * SUPPORTED TOKENS: <lookup>
+	 * DEFAULT VALUE: "<lookup>"
+	 */
+	// "projectFolder": "..",
+
+	/**
+	 * (REQUIRED) Specifies the .d.ts file to be used as the starting point for analysis.  API Extractor
+	 * analyzes the symbols exported by this module.
+	 *
+	 * The file extension must be ".d.ts" and not ".ts".
+	 *
+	 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
+	 * prepend a folder token such as "<projectFolder>".
+	 *
+	 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
+	 */
+	"mainEntryPointFilePath": "<projectFolder>/dist/index.d.ts",
+
+	/**
+	 * A list of NPM package names whose exports should be treated as part of this package.
+	 *
+	 * For example, suppose that Webpack is used to generate a distributed bundle for the project "library1",
+	 * and another NPM package "library2" is embedded in this bundle.  Some types from library2 may become part
+	 * of the exported API for library1, but by default API Extractor would generate a .d.ts rollup that explicitly
+	 * imports library2.  To avoid this, we can specify:
+	 *
+	 *   "bundledPackages": [ "library2" ],
+	 *
+	 * This would direct API Extractor to embed those types directly in the .d.ts rollup, as if they had been
+	 * local files for library1.
+	 */
+	"bundledPackages": [],
+
+	/**
+	 * Determines how the TypeScript compiler engine will be invoked by API Extractor.
+	 */
+	"compiler": {
+		/**
+		 * Specifies the path to the tsconfig.json file to be used by API Extractor when analyzing the project.
+		 *
+		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
+		 * prepend a folder token such as "<projectFolder>".
+		 *
+		 * Note: This setting will be ignored if "overrideTsconfig" is used.
+		 *
+		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
+		 * DEFAULT VALUE: "<projectFolder>/tsconfig.json"
+		 */
+		// "tsconfigFilePath": "<projectFolder>/tsconfig.json",
+		/**
+		 * Provides a compiler configuration that will be used instead of reading the tsconfig.json file from disk.
+		 * The object must conform to the TypeScript tsconfig schema:
+		 *
+		 * http://json.schemastore.org/tsconfig
+		 *
+		 * If omitted, then the tsconfig.json file will be read from the "projectFolder".
+		 *
+		 * DEFAULT VALUE: no overrideTsconfig section
+		 */
+		// "overrideTsconfig": {
+		//   . . .
+		// }
+		/**
+		 * This option causes the compiler to be invoked with the --skipLibCheck option. This option is not recommended
+		 * and may cause API Extractor to produce incomplete or incorrect declarations, but it may be required when
+		 * dependencies contain declarations that are incompatible with the TypeScript engine that API Extractor uses
+		 * for its analysis.  Where possible, the underlying issue should be fixed rather than relying on skipLibCheck.
+		 *
+		 * DEFAULT VALUE: false
+		 */
+		// "skipLibCheck": true,
+	},
+
+	/**
+	 * Configures how the API report file (*.api.md) will be generated.
+	 */
+	"apiReport": {
+		/**
+		 * (REQUIRED) Whether to generate an API report.
+		 */
+		"enabled": false
+
+		/**
+		 * The filename for the API report files.  It will be combined with "reportFolder" or "reportTempFolder" to produce
+		 * a full file path.
+		 *
+		 * The file extension should be ".api.md", and the string should not contain a path separator such as "\" or "/".
+		 *
+		 * SUPPORTED TOKENS: <packageName>, <unscopedPackageName>
+		 * DEFAULT VALUE: "<unscopedPackageName>.api.md"
+		 */
+		// "reportFileName": "<unscopedPackageName>.api.md",
+
+		/**
+		 * Specifies the folder where the API report file is written.  The file name portion is determined by
+		 * the "reportFileName" setting.
+		 *
+		 * The API report file is normally tracked by Git.  Changes to it can be used to trigger a branch policy,
+		 * e.g. for an API review.
+		 *
+		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
+		 * prepend a folder token such as "<projectFolder>".
+		 *
+		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
+		 * DEFAULT VALUE: "<projectFolder>/temp/"
+		 */
+		// "reportFolder": "<projectFolder>/temp/",
+
+		/**
+		 * Specifies the folder where the temporary report file is written.  The file name portion is determined by
+		 * the "reportFileName" setting.
+		 *
+		 * After the temporary file is written to disk, it is compared with the file in the "reportFolder".
+		 * If they are different, a production build will fail.
+		 *
+		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
+		 * prepend a folder token such as "<projectFolder>".
+		 *
+		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
+		 * DEFAULT VALUE: "<projectFolder>/temp/"
+		 */
+		// "reportTempFolder": "<projectFolder>/temp/"
+	},
+
+	/**
+	 * Configures how the doc model file (*.api.json) will be generated.
+	 */
+	"docModel": {
+		/**
+		 * (REQUIRED) Whether to generate a doc model file.
+		 */
+		"enabled": true,
+
+		/**
+		 * The output path for the doc model file.  The file extension should be ".api.json".
+		 *
+		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
+		 * prepend a folder token such as "<projectFolder>".
+		 *
+		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
+		 * DEFAULT VALUE: "<projectFolder>/temp/<unscopedPackageName>.api.json"
+		 */
+		"apiJsonFilePath": "<projectFolder>/docs/docs.api.json"
+	},
+
+	/**
+	 * Configures how the .d.ts rollup file will be generated.
+	 */
+	"dtsRollup": {
+		/**
+		 * (REQUIRED) Whether to generate the .d.ts rollup file.
+		 */
+		"enabled": false
+
+		/**
+		 * Specifies the output path for a .d.ts rollup file to be generated without any trimming.
+		 * This file will include all declarations that are exported by the main entry point.
+		 *
+		 * If the path is an empty string, then this file will not be written.
+		 *
+		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
+		 * prepend a folder token such as "<projectFolder>".
+		 *
+		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
+		 * DEFAULT VALUE: "<projectFolder>/dist/<unscopedPackageName>.d.ts"
+		 */
+		// "untrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>.d.ts",
+
+		/**
+		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for an "alpha" release.
+		 * This file will include only declarations that are marked as "@public", "@beta", or "@alpha".
+		 *
+		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
+		 * prepend a folder token such as "<projectFolder>".
+		 *
+		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
+		 * DEFAULT VALUE: ""
+		 */
+		// "alphaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-alpha.d.ts",
+
+		/**
+		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "beta" release.
+		 * This file will include only declarations that are marked as "@public" or "@beta".
+		 *
+		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
+		 * prepend a folder token such as "<projectFolder>".
+		 *
+		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
+		 * DEFAULT VALUE: ""
+		 */
+		// "betaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-beta.d.ts",
+
+		/**
+		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "public" release.
+		 * This file will include only declarations that are marked as "@public".
+		 *
+		 * If the path is an empty string, then this file will not be written.
+		 *
+		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
+		 * prepend a folder token such as "<projectFolder>".
+		 *
+		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
+		 * DEFAULT VALUE: ""
+		 */
+		// "publicTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-public.d.ts",
+
+		/**
+		 * When a declaration is trimmed, by default it will be replaced by a code comment such as
+		 * "Excluded from this release type: exampleMember".  Set "omitTrimmingComments" to true to remove the
+		 * declaration completely.
+		 *
+		 * DEFAULT VALUE: false
+		 */
+		// "omitTrimmingComments": true
+	},
+
+	/**
+	 * Configures how the tsdoc-metadata.json file will be generated.
+	 */
+	"tsdocMetadata": {
+		/**
+		 * Whether to generate the tsdoc-metadata.json file.
+		 *
+		 * DEFAULT VALUE: true
+		 */
+		// "enabled": true,
+		/**
+		 * Specifies where the TSDoc metadata file should be written.
+		 *
+		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
+		 * prepend a folder token such as "<projectFolder>".
+		 *
+		 * The default value is "<lookup>", which causes the path to be automatically inferred from the "tsdocMetadata",
+		 * "typings" or "main" fields of the project's package.json.  If none of these fields are set, the lookup
+		 * falls back to "tsdoc-metadata.json" in the package folder.
+		 *
+		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
+		 * DEFAULT VALUE: "<lookup>"
+		 */
+		// "tsdocMetadataFilePath": "<projectFolder>/dist/tsdoc-metadata.json"
+	},
+
+	/**
+	 * Specifies what type of newlines API Extractor should use when writing output files.  By default, the output files
+	 * will be written with Windows-style newlines.  To use POSIX-style newlines, specify "lf" instead.
+	 * To use the OS's default newline kind, specify "os".
+	 *
+	 * DEFAULT VALUE: "crlf"
+	 */
+	"newlineKind": "lf",
+
+	/**
+	 * Configures how API Extractor reports error and warning messages produced during analysis.
+	 *
+	 * There are three sources of messages:  compiler messages, API Extractor messages, and TSDoc messages.
+	 */
+	"messages": {
+		/**
+		 * Configures handling of diagnostic messages reported by the TypeScript compiler engine while analyzing
+		 * the input .d.ts files.
+		 *
+		 * TypeScript message identifiers start with "TS" followed by an integer.  For example: "TS2551"
+		 *
+		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
+		 */
+		"compilerMessageReporting": {
+			/**
+			 * Configures the default routing for messages that don't match an explicit rule in this table.
+			 */
+			"default": {
+				/**
+				 * Specifies whether the message should be written to the the tool's output log.  Note that
+				 * the "addToApiReportFile" property may supersede this option.
+				 *
+				 * Possible values: "error", "warning", "none"
+				 *
+				 * Errors cause the build to fail and return a nonzero exit code.  Warnings cause a production build fail
+				 * and return a nonzero exit code.  For a non-production build (e.g. when "api-extractor run" includes
+				 * the "--local" option), the warning is displayed but the build will not fail.
+				 *
+				 * DEFAULT VALUE: "warning"
+				 */
+				"logLevel": "warning"
+
+				/**
+				 * When addToApiReportFile is true:  If API Extractor is configured to write an API report file (.api.md),
+				 * then the message will be written inside that file; otherwise, the message is instead logged according to
+				 * the "logLevel" option.
+				 *
+				 * DEFAULT VALUE: false
+				 */
+				// "addToApiReportFile": false
+			}
+
+			// "TS2551": {
+			//   "logLevel": "warning",
+			//   "addToApiReportFile": true
+			// },
+			//
+			// . . .
+		},
+
+		/**
+		 * Configures handling of messages reported by API Extractor during its analysis.
+		 *
+		 * API Extractor message identifiers start with "ae-".  For example: "ae-extra-release-tag"
+		 *
+		 * DEFAULT VALUE: See api-extractor-defaults.json for the complete table of extractorMessageReporting mappings
+		 */
+		"extractorMessageReporting": {
+			"default": {
+				"logLevel": "warning"
+				// "addToApiReportFile": false
+			},
+
+			// Disable the following warning:
+			// (ae-missing-release-tag) "x" is part of the package's API, but it is missing a release tag (@alpha, @beta, @public, or @internal)
+			"ae-missing-release-tag": {
+				"logLevel": "none"
+			}
+
+			// "ae-extra-release-tag": {
+			//   "logLevel": "warning",
+			//   "addToApiReportFile": true
+			// },
+			//
+			// . . .
+		},
+
+		/**
+		 * Configures handling of messages reported by the TSDoc parser when analyzing code comments.
+		 *
+		 * TSDoc message identifiers start with "tsdoc-".  For example: "tsdoc-link-tag-unescaped-text"
+		 *
+		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
+		 */
+		"tsdocMessageReporting": {
+			"default": {
+				"logLevel": "warning"
+				// "addToApiReportFile": false
+			}
+
+			// "tsdoc-link-tag-unescaped-text": {
+			//   "logLevel": "warning",
+			//   "addToApiReportFile": true
+			// },
+			//
+			// . . .
+		}
+	}
+}
diff --git a/packages/builders/api-extractor.json b/packages/builders/api-extractor.json
index 823f95646..bc73f2cc0 100644
--- a/packages/builders/api-extractor.json
+++ b/packages/builders/api-extractor.json
@@ -1,376 +1,3 @@
-/**
- * Config file for API Extractor.  For more info, please visit: https://api-extractor.com
- */
 {
-	"$schema": "https://developer.microsoft.com/json-schemas/api-extractor/v7/api-extractor.schema.json",
-
-	/**
-	 * Optionally specifies another JSON config file that this file extends from.  This provides a way for
-	 * standard settings to be shared across multiple projects.
-	 *
-	 * If the path starts with "./" or "../", the path is resolved relative to the folder of the file that contains
-	 * the "extends" field.  Otherwise, the first path segment is interpreted as an NPM package name, and will be
-	 * resolved using NodeJS require().
-	 *
-	 * SUPPORTED TOKENS: none
-	 * DEFAULT VALUE: ""
-	 */
-	// "extends": "./shared/api-extractor-base.json"
-	// "extends": "my-package/include/api-extractor-base.json"
-
-	/**
-	 * Determines the "<projectFolder>" token that can be used with other config file settings.  The project folder
-	 * typically contains the tsconfig.json and package.json config files, but the path is user-defined.
-	 *
-	 * The path is resolved relative to the folder of the config file that contains the setting.
-	 *
-	 * The default value for "projectFolder" is the token "<lookup>", which means the folder is determined by traversing
-	 * parent folders, starting from the folder containing api-extractor.json, and stopping at the first folder
-	 * that contains a tsconfig.json file.  If a tsconfig.json file cannot be found in this way, then an error
-	 * will be reported.
-	 *
-	 * SUPPORTED TOKENS: <lookup>
-	 * DEFAULT VALUE: "<lookup>"
-	 */
-	// "projectFolder": "..",
-
-	/**
-	 * (REQUIRED) Specifies the .d.ts file to be used as the starting point for analysis.  API Extractor
-	 * analyzes the symbols exported by this module.
-	 *
-	 * The file extension must be ".d.ts" and not ".ts".
-	 *
-	 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-	 * prepend a folder token such as "<projectFolder>".
-	 *
-	 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-	 */
-	"mainEntryPointFilePath": "<projectFolder>/docs/dist/index.d.ts",
-
-	/**
-	 * A list of NPM package names whose exports should be treated as part of this package.
-	 *
-	 * For example, suppose that Webpack is used to generate a distributed bundle for the project "library1",
-	 * and another NPM package "library2" is embedded in this bundle.  Some types from library2 may become part
-	 * of the exported API for library1, but by default API Extractor would generate a .d.ts rollup that explicitly
-	 * imports library2.  To avoid this, we can specify:
-	 *
-	 *   "bundledPackages": [ "library2" ],
-	 *
-	 * This would direct API Extractor to embed those types directly in the .d.ts rollup, as if they had been
-	 * local files for library1.
-	 */
-	"bundledPackages": [],
-
-	/**
-	 * Determines how the TypeScript compiler engine will be invoked by API Extractor.
-	 */
-	"compiler": {
-		/**
-		 * Specifies the path to the tsconfig.json file to be used by API Extractor when analyzing the project.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * Note: This setting will be ignored if "overrideTsconfig" is used.
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/tsconfig.json"
-		 */
-		// "tsconfigFilePath": "<projectFolder>/tsconfig.json",
-		/**
-		 * Provides a compiler configuration that will be used instead of reading the tsconfig.json file from disk.
-		 * The object must conform to the TypeScript tsconfig schema:
-		 *
-		 * http://json.schemastore.org/tsconfig
-		 *
-		 * If omitted, then the tsconfig.json file will be read from the "projectFolder".
-		 *
-		 * DEFAULT VALUE: no overrideTsconfig section
-		 */
-		// "overrideTsconfig": {
-		//   . . .
-		// }
-		/**
-		 * This option causes the compiler to be invoked with the --skipLibCheck option. This option is not recommended
-		 * and may cause API Extractor to produce incomplete or incorrect declarations, but it may be required when
-		 * dependencies contain declarations that are incompatible with the TypeScript engine that API Extractor uses
-		 * for its analysis.  Where possible, the underlying issue should be fixed rather than relying on skipLibCheck.
-		 *
-		 * DEFAULT VALUE: false
-		 */
-		// "skipLibCheck": true,
-	},
-
-	/**
-	 * Configures how the API report file (*.api.md) will be generated.
-	 */
-	"apiReport": {
-		/**
-		 * (REQUIRED) Whether to generate an API report.
-		 */
-		"enabled": false
-
-		/**
-		 * The filename for the API report files.  It will be combined with "reportFolder" or "reportTempFolder" to produce
-		 * a full file path.
-		 *
-		 * The file extension should be ".api.md", and the string should not contain a path separator such as "\" or "/".
-		 *
-		 * SUPPORTED TOKENS: <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<unscopedPackageName>.api.md"
-		 */
-		// "reportFileName": "<unscopedPackageName>.api.md",
-
-		/**
-		 * Specifies the folder where the API report file is written.  The file name portion is determined by
-		 * the "reportFileName" setting.
-		 *
-		 * The API report file is normally tracked by Git.  Changes to it can be used to trigger a branch policy,
-		 * e.g. for an API review.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/"
-		 */
-		// "reportFolder": "<projectFolder>/temp/",
-
-		/**
-		 * Specifies the folder where the temporary report file is written.  The file name portion is determined by
-		 * the "reportFileName" setting.
-		 *
-		 * After the temporary file is written to disk, it is compared with the file in the "reportFolder".
-		 * If they are different, a production build will fail.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/"
-		 */
-		// "reportTempFolder": "<projectFolder>/temp/"
-	},
-
-	/**
-	 * Configures how the doc model file (*.api.json) will be generated.
-	 */
-	"docModel": {
-		/**
-		 * (REQUIRED) Whether to generate a doc model file.
-		 */
-		"enabled": true,
-
-		/**
-		 * The output path for the doc model file.  The file extension should be ".api.json".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/<unscopedPackageName>.api.json"
-		 */
-		"apiJsonFilePath": "<projectFolder>/docs/docs.api.json"
-	},
-
-	/**
-	 * Configures how the .d.ts rollup file will be generated.
-	 */
-	"dtsRollup": {
-		/**
-		 * (REQUIRED) Whether to generate the .d.ts rollup file.
-		 */
-		"enabled": false
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated without any trimming.
-		 * This file will include all declarations that are exported by the main entry point.
-		 *
-		 * If the path is an empty string, then this file will not be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/dist/<unscopedPackageName>.d.ts"
-		 */
-		// "untrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for an "alpha" release.
-		 * This file will include only declarations that are marked as "@public", "@beta", or "@alpha".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "alphaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-alpha.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "beta" release.
-		 * This file will include only declarations that are marked as "@public" or "@beta".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "betaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-beta.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "public" release.
-		 * This file will include only declarations that are marked as "@public".
-		 *
-		 * If the path is an empty string, then this file will not be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "publicTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-public.d.ts",
-
-		/**
-		 * When a declaration is trimmed, by default it will be replaced by a code comment such as
-		 * "Excluded from this release type: exampleMember".  Set "omitTrimmingComments" to true to remove the
-		 * declaration completely.
-		 *
-		 * DEFAULT VALUE: false
-		 */
-		// "omitTrimmingComments": true
-	},
-
-	/**
-	 * Configures how the tsdoc-metadata.json file will be generated.
-	 */
-	"tsdocMetadata": {
-		/**
-		 * Whether to generate the tsdoc-metadata.json file.
-		 *
-		 * DEFAULT VALUE: true
-		 */
-		// "enabled": true,
-		/**
-		 * Specifies where the TSDoc metadata file should be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * The default value is "<lookup>", which causes the path to be automatically inferred from the "tsdocMetadata",
-		 * "typings" or "main" fields of the project's package.json.  If none of these fields are set, the lookup
-		 * falls back to "tsdoc-metadata.json" in the package folder.
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<lookup>"
-		 */
-		// "tsdocMetadataFilePath": "<projectFolder>/dist/tsdoc-metadata.json"
-	},
-
-	/**
-	 * Specifies what type of newlines API Extractor should use when writing output files.  By default, the output files
-	 * will be written with Windows-style newlines.  To use POSIX-style newlines, specify "lf" instead.
-	 * To use the OS's default newline kind, specify "os".
-	 *
-	 * DEFAULT VALUE: "crlf"
-	 */
-	"newlineKind": "lf",
-
-	/**
-	 * Configures how API Extractor reports error and warning messages produced during analysis.
-	 *
-	 * There are three sources of messages:  compiler messages, API Extractor messages, and TSDoc messages.
-	 */
-	"messages": {
-		/**
-		 * Configures handling of diagnostic messages reported by the TypeScript compiler engine while analyzing
-		 * the input .d.ts files.
-		 *
-		 * TypeScript message identifiers start with "TS" followed by an integer.  For example: "TS2551"
-		 *
-		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
-		 */
-		"compilerMessageReporting": {
-			/**
-			 * Configures the default routing for messages that don't match an explicit rule in this table.
-			 */
-			"default": {
-				/**
-				 * Specifies whether the message should be written to the the tool's output log.  Note that
-				 * the "addToApiReportFile" property may supersede this option.
-				 *
-				 * Possible values: "error", "warning", "none"
-				 *
-				 * Errors cause the build to fail and return a nonzero exit code.  Warnings cause a production build fail
-				 * and return a nonzero exit code.  For a non-production build (e.g. when "api-extractor run" includes
-				 * the "--local" option), the warning is displayed but the build will not fail.
-				 *
-				 * DEFAULT VALUE: "warning"
-				 */
-				"logLevel": "warning"
-
-				/**
-				 * When addToApiReportFile is true:  If API Extractor is configured to write an API report file (.api.md),
-				 * then the message will be written inside that file; otherwise, the message is instead logged according to
-				 * the "logLevel" option.
-				 *
-				 * DEFAULT VALUE: false
-				 */
-				// "addToApiReportFile": false
-			}
-
-			// "TS2551": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		},
-
-		/**
-		 * Configures handling of messages reported by API Extractor during its analysis.
-		 *
-		 * API Extractor message identifiers start with "ae-".  For example: "ae-extra-release-tag"
-		 *
-		 * DEFAULT VALUE: See api-extractor-defaults.json for the complete table of extractorMessageReporting mappings
-		 */
-		"extractorMessageReporting": {
-			"default": {
-				"logLevel": "warning"
-				// "addToApiReportFile": false
-			}
-
-			// "ae-extra-release-tag": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		},
-
-		/**
-		 * Configures handling of messages reported by the TSDoc parser when analyzing code comments.
-		 *
-		 * TSDoc message identifiers start with "tsdoc-".  For example: "tsdoc-link-tag-unescaped-text"
-		 *
-		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
-		 */
-		"tsdocMessageReporting": {
-			"default": {
-				"logLevel": "warning"
-				// "addToApiReportFile": false
-			}
-
-			// "tsdoc-link-tag-unescaped-text": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		}
-	}
+	"extends": "../../api-extractor.json"
 }
diff --git a/packages/builders/package.json b/packages/builders/package.json
index 144f81fe1..240623c8d 100644
--- a/packages/builders/package.json
+++ b/packages/builders/package.json
@@ -8,7 +8,7 @@
 		"lint": "prettier --check . && cross-env TIMING=1 eslint src __tests__ --ext .mjs,.js,.ts --format=pretty",
 		"format": "prettier --write . && cross-env TIMING=1 eslint src __tests__ --ext .mjs,.js,.ts --fix --format=pretty",
 		"fmt": "yarn format",
-		"docs": "downlevel-dts dist docs/dist --to=3.7 && api-extractor run --local",
+		"docs": "api-extractor run --local",
 		"prepack": "yarn lint && yarn test && yarn build",
 		"changelog": "git cliff --prepend ./CHANGELOG.md -u -c ./cliff.toml -r ../../ --include-path 'packages/builders/*'",
 		"release": "cliff-jumper"
@@ -67,7 +67,6 @@
 		"@types/node": "16.11.64",
 		"@vitest/coverage-c8": "^0.24.1",
 		"cross-env": "^7.0.3",
-		"downlevel-dts": "^0.10.1",
 		"esbuild-plugin-version-injector": "^1.0.0",
 		"eslint": "^8.25.0",
 		"eslint-config-neon": "^0.1.38",
diff --git a/packages/collection/api-extractor.json b/packages/collection/api-extractor.json
index 823f95646..bc73f2cc0 100644
--- a/packages/collection/api-extractor.json
+++ b/packages/collection/api-extractor.json
@@ -1,376 +1,3 @@
-/**
- * Config file for API Extractor.  For more info, please visit: https://api-extractor.com
- */
 {
-	"$schema": "https://developer.microsoft.com/json-schemas/api-extractor/v7/api-extractor.schema.json",
-
-	/**
-	 * Optionally specifies another JSON config file that this file extends from.  This provides a way for
-	 * standard settings to be shared across multiple projects.
-	 *
-	 * If the path starts with "./" or "../", the path is resolved relative to the folder of the file that contains
-	 * the "extends" field.  Otherwise, the first path segment is interpreted as an NPM package name, and will be
-	 * resolved using NodeJS require().
-	 *
-	 * SUPPORTED TOKENS: none
-	 * DEFAULT VALUE: ""
-	 */
-	// "extends": "./shared/api-extractor-base.json"
-	// "extends": "my-package/include/api-extractor-base.json"
-
-	/**
-	 * Determines the "<projectFolder>" token that can be used with other config file settings.  The project folder
-	 * typically contains the tsconfig.json and package.json config files, but the path is user-defined.
-	 *
-	 * The path is resolved relative to the folder of the config file that contains the setting.
-	 *
-	 * The default value for "projectFolder" is the token "<lookup>", which means the folder is determined by traversing
-	 * parent folders, starting from the folder containing api-extractor.json, and stopping at the first folder
-	 * that contains a tsconfig.json file.  If a tsconfig.json file cannot be found in this way, then an error
-	 * will be reported.
-	 *
-	 * SUPPORTED TOKENS: <lookup>
-	 * DEFAULT VALUE: "<lookup>"
-	 */
-	// "projectFolder": "..",
-
-	/**
-	 * (REQUIRED) Specifies the .d.ts file to be used as the starting point for analysis.  API Extractor
-	 * analyzes the symbols exported by this module.
-	 *
-	 * The file extension must be ".d.ts" and not ".ts".
-	 *
-	 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-	 * prepend a folder token such as "<projectFolder>".
-	 *
-	 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-	 */
-	"mainEntryPointFilePath": "<projectFolder>/docs/dist/index.d.ts",
-
-	/**
-	 * A list of NPM package names whose exports should be treated as part of this package.
-	 *
-	 * For example, suppose that Webpack is used to generate a distributed bundle for the project "library1",
-	 * and another NPM package "library2" is embedded in this bundle.  Some types from library2 may become part
-	 * of the exported API for library1, but by default API Extractor would generate a .d.ts rollup that explicitly
-	 * imports library2.  To avoid this, we can specify:
-	 *
-	 *   "bundledPackages": [ "library2" ],
-	 *
-	 * This would direct API Extractor to embed those types directly in the .d.ts rollup, as if they had been
-	 * local files for library1.
-	 */
-	"bundledPackages": [],
-
-	/**
-	 * Determines how the TypeScript compiler engine will be invoked by API Extractor.
-	 */
-	"compiler": {
-		/**
-		 * Specifies the path to the tsconfig.json file to be used by API Extractor when analyzing the project.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * Note: This setting will be ignored if "overrideTsconfig" is used.
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/tsconfig.json"
-		 */
-		// "tsconfigFilePath": "<projectFolder>/tsconfig.json",
-		/**
-		 * Provides a compiler configuration that will be used instead of reading the tsconfig.json file from disk.
-		 * The object must conform to the TypeScript tsconfig schema:
-		 *
-		 * http://json.schemastore.org/tsconfig
-		 *
-		 * If omitted, then the tsconfig.json file will be read from the "projectFolder".
-		 *
-		 * DEFAULT VALUE: no overrideTsconfig section
-		 */
-		// "overrideTsconfig": {
-		//   . . .
-		// }
-		/**
-		 * This option causes the compiler to be invoked with the --skipLibCheck option. This option is not recommended
-		 * and may cause API Extractor to produce incomplete or incorrect declarations, but it may be required when
-		 * dependencies contain declarations that are incompatible with the TypeScript engine that API Extractor uses
-		 * for its analysis.  Where possible, the underlying issue should be fixed rather than relying on skipLibCheck.
-		 *
-		 * DEFAULT VALUE: false
-		 */
-		// "skipLibCheck": true,
-	},
-
-	/**
-	 * Configures how the API report file (*.api.md) will be generated.
-	 */
-	"apiReport": {
-		/**
-		 * (REQUIRED) Whether to generate an API report.
-		 */
-		"enabled": false
-
-		/**
-		 * The filename for the API report files.  It will be combined with "reportFolder" or "reportTempFolder" to produce
-		 * a full file path.
-		 *
-		 * The file extension should be ".api.md", and the string should not contain a path separator such as "\" or "/".
-		 *
-		 * SUPPORTED TOKENS: <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<unscopedPackageName>.api.md"
-		 */
-		// "reportFileName": "<unscopedPackageName>.api.md",
-
-		/**
-		 * Specifies the folder where the API report file is written.  The file name portion is determined by
-		 * the "reportFileName" setting.
-		 *
-		 * The API report file is normally tracked by Git.  Changes to it can be used to trigger a branch policy,
-		 * e.g. for an API review.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/"
-		 */
-		// "reportFolder": "<projectFolder>/temp/",
-
-		/**
-		 * Specifies the folder where the temporary report file is written.  The file name portion is determined by
-		 * the "reportFileName" setting.
-		 *
-		 * After the temporary file is written to disk, it is compared with the file in the "reportFolder".
-		 * If they are different, a production build will fail.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/"
-		 */
-		// "reportTempFolder": "<projectFolder>/temp/"
-	},
-
-	/**
-	 * Configures how the doc model file (*.api.json) will be generated.
-	 */
-	"docModel": {
-		/**
-		 * (REQUIRED) Whether to generate a doc model file.
-		 */
-		"enabled": true,
-
-		/**
-		 * The output path for the doc model file.  The file extension should be ".api.json".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/<unscopedPackageName>.api.json"
-		 */
-		"apiJsonFilePath": "<projectFolder>/docs/docs.api.json"
-	},
-
-	/**
-	 * Configures how the .d.ts rollup file will be generated.
-	 */
-	"dtsRollup": {
-		/**
-		 * (REQUIRED) Whether to generate the .d.ts rollup file.
-		 */
-		"enabled": false
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated without any trimming.
-		 * This file will include all declarations that are exported by the main entry point.
-		 *
-		 * If the path is an empty string, then this file will not be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/dist/<unscopedPackageName>.d.ts"
-		 */
-		// "untrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for an "alpha" release.
-		 * This file will include only declarations that are marked as "@public", "@beta", or "@alpha".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "alphaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-alpha.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "beta" release.
-		 * This file will include only declarations that are marked as "@public" or "@beta".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "betaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-beta.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "public" release.
-		 * This file will include only declarations that are marked as "@public".
-		 *
-		 * If the path is an empty string, then this file will not be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "publicTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-public.d.ts",
-
-		/**
-		 * When a declaration is trimmed, by default it will be replaced by a code comment such as
-		 * "Excluded from this release type: exampleMember".  Set "omitTrimmingComments" to true to remove the
-		 * declaration completely.
-		 *
-		 * DEFAULT VALUE: false
-		 */
-		// "omitTrimmingComments": true
-	},
-
-	/**
-	 * Configures how the tsdoc-metadata.json file will be generated.
-	 */
-	"tsdocMetadata": {
-		/**
-		 * Whether to generate the tsdoc-metadata.json file.
-		 *
-		 * DEFAULT VALUE: true
-		 */
-		// "enabled": true,
-		/**
-		 * Specifies where the TSDoc metadata file should be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * The default value is "<lookup>", which causes the path to be automatically inferred from the "tsdocMetadata",
-		 * "typings" or "main" fields of the project's package.json.  If none of these fields are set, the lookup
-		 * falls back to "tsdoc-metadata.json" in the package folder.
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<lookup>"
-		 */
-		// "tsdocMetadataFilePath": "<projectFolder>/dist/tsdoc-metadata.json"
-	},
-
-	/**
-	 * Specifies what type of newlines API Extractor should use when writing output files.  By default, the output files
-	 * will be written with Windows-style newlines.  To use POSIX-style newlines, specify "lf" instead.
-	 * To use the OS's default newline kind, specify "os".
-	 *
-	 * DEFAULT VALUE: "crlf"
-	 */
-	"newlineKind": "lf",
-
-	/**
-	 * Configures how API Extractor reports error and warning messages produced during analysis.
-	 *
-	 * There are three sources of messages:  compiler messages, API Extractor messages, and TSDoc messages.
-	 */
-	"messages": {
-		/**
-		 * Configures handling of diagnostic messages reported by the TypeScript compiler engine while analyzing
-		 * the input .d.ts files.
-		 *
-		 * TypeScript message identifiers start with "TS" followed by an integer.  For example: "TS2551"
-		 *
-		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
-		 */
-		"compilerMessageReporting": {
-			/**
-			 * Configures the default routing for messages that don't match an explicit rule in this table.
-			 */
-			"default": {
-				/**
-				 * Specifies whether the message should be written to the the tool's output log.  Note that
-				 * the "addToApiReportFile" property may supersede this option.
-				 *
-				 * Possible values: "error", "warning", "none"
-				 *
-				 * Errors cause the build to fail and return a nonzero exit code.  Warnings cause a production build fail
-				 * and return a nonzero exit code.  For a non-production build (e.g. when "api-extractor run" includes
-				 * the "--local" option), the warning is displayed but the build will not fail.
-				 *
-				 * DEFAULT VALUE: "warning"
-				 */
-				"logLevel": "warning"
-
-				/**
-				 * When addToApiReportFile is true:  If API Extractor is configured to write an API report file (.api.md),
-				 * then the message will be written inside that file; otherwise, the message is instead logged according to
-				 * the "logLevel" option.
-				 *
-				 * DEFAULT VALUE: false
-				 */
-				// "addToApiReportFile": false
-			}
-
-			// "TS2551": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		},
-
-		/**
-		 * Configures handling of messages reported by API Extractor during its analysis.
-		 *
-		 * API Extractor message identifiers start with "ae-".  For example: "ae-extra-release-tag"
-		 *
-		 * DEFAULT VALUE: See api-extractor-defaults.json for the complete table of extractorMessageReporting mappings
-		 */
-		"extractorMessageReporting": {
-			"default": {
-				"logLevel": "warning"
-				// "addToApiReportFile": false
-			}
-
-			// "ae-extra-release-tag": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		},
-
-		/**
-		 * Configures handling of messages reported by the TSDoc parser when analyzing code comments.
-		 *
-		 * TSDoc message identifiers start with "tsdoc-".  For example: "tsdoc-link-tag-unescaped-text"
-		 *
-		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
-		 */
-		"tsdocMessageReporting": {
-			"default": {
-				"logLevel": "warning"
-				// "addToApiReportFile": false
-			}
-
-			// "tsdoc-link-tag-unescaped-text": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		}
-	}
+	"extends": "../../api-extractor.json"
 }
diff --git a/packages/collection/package.json b/packages/collection/package.json
index 0949ccebc..53e96e8ef 100644
--- a/packages/collection/package.json
+++ b/packages/collection/package.json
@@ -8,7 +8,7 @@
 		"lint": "prettier --check . && cross-env TIMING=1 eslint src __tests__ --ext .mjs,.js,.ts --format=pretty",
 		"format": "prettier --write . && cross-env TIMING=1 eslint src __tests__ --ext .mjs,.js,.ts --fix --format=pretty",
 		"fmt": "yarn format",
-		"docs": "downlevel-dts dist docs/dist --to=3.7 && api-extractor run --local",
+		"docs": "api-extractor run --local",
 		"prepack": "yarn lint && yarn test && yarn build",
 		"changelog": "git cliff --prepend ./CHANGELOG.md -u -c ./cliff.toml -r ../../ --include-path 'packages/collection/*'",
 		"release": "cliff-jumper"
@@ -55,7 +55,6 @@
 		"@types/node": "16.11.64",
 		"@vitest/coverage-c8": "^0.24.1",
 		"cross-env": "^7.0.3",
-		"downlevel-dts": "^0.10.1",
 		"esbuild-plugin-version-injector": "^1.0.0",
 		"eslint": "^8.25.0",
 		"eslint-config-neon": "^0.1.38",
diff --git a/packages/proxy/api-extractor.json b/packages/proxy/api-extractor.json
index 823f95646..bc73f2cc0 100644
--- a/packages/proxy/api-extractor.json
+++ b/packages/proxy/api-extractor.json
@@ -1,376 +1,3 @@
-/**
- * Config file for API Extractor.  For more info, please visit: https://api-extractor.com
- */
 {
-	"$schema": "https://developer.microsoft.com/json-schemas/api-extractor/v7/api-extractor.schema.json",
-
-	/**
-	 * Optionally specifies another JSON config file that this file extends from.  This provides a way for
-	 * standard settings to be shared across multiple projects.
-	 *
-	 * If the path starts with "./" or "../", the path is resolved relative to the folder of the file that contains
-	 * the "extends" field.  Otherwise, the first path segment is interpreted as an NPM package name, and will be
-	 * resolved using NodeJS require().
-	 *
-	 * SUPPORTED TOKENS: none
-	 * DEFAULT VALUE: ""
-	 */
-	// "extends": "./shared/api-extractor-base.json"
-	// "extends": "my-package/include/api-extractor-base.json"
-
-	/**
-	 * Determines the "<projectFolder>" token that can be used with other config file settings.  The project folder
-	 * typically contains the tsconfig.json and package.json config files, but the path is user-defined.
-	 *
-	 * The path is resolved relative to the folder of the config file that contains the setting.
-	 *
-	 * The default value for "projectFolder" is the token "<lookup>", which means the folder is determined by traversing
-	 * parent folders, starting from the folder containing api-extractor.json, and stopping at the first folder
-	 * that contains a tsconfig.json file.  If a tsconfig.json file cannot be found in this way, then an error
-	 * will be reported.
-	 *
-	 * SUPPORTED TOKENS: <lookup>
-	 * DEFAULT VALUE: "<lookup>"
-	 */
-	// "projectFolder": "..",
-
-	/**
-	 * (REQUIRED) Specifies the .d.ts file to be used as the starting point for analysis.  API Extractor
-	 * analyzes the symbols exported by this module.
-	 *
-	 * The file extension must be ".d.ts" and not ".ts".
-	 *
-	 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-	 * prepend a folder token such as "<projectFolder>".
-	 *
-	 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-	 */
-	"mainEntryPointFilePath": "<projectFolder>/docs/dist/index.d.ts",
-
-	/**
-	 * A list of NPM package names whose exports should be treated as part of this package.
-	 *
-	 * For example, suppose that Webpack is used to generate a distributed bundle for the project "library1",
-	 * and another NPM package "library2" is embedded in this bundle.  Some types from library2 may become part
-	 * of the exported API for library1, but by default API Extractor would generate a .d.ts rollup that explicitly
-	 * imports library2.  To avoid this, we can specify:
-	 *
-	 *   "bundledPackages": [ "library2" ],
-	 *
-	 * This would direct API Extractor to embed those types directly in the .d.ts rollup, as if they had been
-	 * local files for library1.
-	 */
-	"bundledPackages": [],
-
-	/**
-	 * Determines how the TypeScript compiler engine will be invoked by API Extractor.
-	 */
-	"compiler": {
-		/**
-		 * Specifies the path to the tsconfig.json file to be used by API Extractor when analyzing the project.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * Note: This setting will be ignored if "overrideTsconfig" is used.
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/tsconfig.json"
-		 */
-		// "tsconfigFilePath": "<projectFolder>/tsconfig.json",
-		/**
-		 * Provides a compiler configuration that will be used instead of reading the tsconfig.json file from disk.
-		 * The object must conform to the TypeScript tsconfig schema:
-		 *
-		 * http://json.schemastore.org/tsconfig
-		 *
-		 * If omitted, then the tsconfig.json file will be read from the "projectFolder".
-		 *
-		 * DEFAULT VALUE: no overrideTsconfig section
-		 */
-		// "overrideTsconfig": {
-		//   . . .
-		// }
-		/**
-		 * This option causes the compiler to be invoked with the --skipLibCheck option. This option is not recommended
-		 * and may cause API Extractor to produce incomplete or incorrect declarations, but it may be required when
-		 * dependencies contain declarations that are incompatible with the TypeScript engine that API Extractor uses
-		 * for its analysis.  Where possible, the underlying issue should be fixed rather than relying on skipLibCheck.
-		 *
-		 * DEFAULT VALUE: false
-		 */
-		// "skipLibCheck": true,
-	},
-
-	/**
-	 * Configures how the API report file (*.api.md) will be generated.
-	 */
-	"apiReport": {
-		/**
-		 * (REQUIRED) Whether to generate an API report.
-		 */
-		"enabled": false
-
-		/**
-		 * The filename for the API report files.  It will be combined with "reportFolder" or "reportTempFolder" to produce
-		 * a full file path.
-		 *
-		 * The file extension should be ".api.md", and the string should not contain a path separator such as "\" or "/".
-		 *
-		 * SUPPORTED TOKENS: <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<unscopedPackageName>.api.md"
-		 */
-		// "reportFileName": "<unscopedPackageName>.api.md",
-
-		/**
-		 * Specifies the folder where the API report file is written.  The file name portion is determined by
-		 * the "reportFileName" setting.
-		 *
-		 * The API report file is normally tracked by Git.  Changes to it can be used to trigger a branch policy,
-		 * e.g. for an API review.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/"
-		 */
-		// "reportFolder": "<projectFolder>/temp/",
-
-		/**
-		 * Specifies the folder where the temporary report file is written.  The file name portion is determined by
-		 * the "reportFileName" setting.
-		 *
-		 * After the temporary file is written to disk, it is compared with the file in the "reportFolder".
-		 * If they are different, a production build will fail.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/"
-		 */
-		// "reportTempFolder": "<projectFolder>/temp/"
-	},
-
-	/**
-	 * Configures how the doc model file (*.api.json) will be generated.
-	 */
-	"docModel": {
-		/**
-		 * (REQUIRED) Whether to generate a doc model file.
-		 */
-		"enabled": true,
-
-		/**
-		 * The output path for the doc model file.  The file extension should be ".api.json".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/<unscopedPackageName>.api.json"
-		 */
-		"apiJsonFilePath": "<projectFolder>/docs/docs.api.json"
-	},
-
-	/**
-	 * Configures how the .d.ts rollup file will be generated.
-	 */
-	"dtsRollup": {
-		/**
-		 * (REQUIRED) Whether to generate the .d.ts rollup file.
-		 */
-		"enabled": false
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated without any trimming.
-		 * This file will include all declarations that are exported by the main entry point.
-		 *
-		 * If the path is an empty string, then this file will not be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/dist/<unscopedPackageName>.d.ts"
-		 */
-		// "untrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for an "alpha" release.
-		 * This file will include only declarations that are marked as "@public", "@beta", or "@alpha".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "alphaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-alpha.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "beta" release.
-		 * This file will include only declarations that are marked as "@public" or "@beta".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "betaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-beta.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "public" release.
-		 * This file will include only declarations that are marked as "@public".
-		 *
-		 * If the path is an empty string, then this file will not be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "publicTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-public.d.ts",
-
-		/**
-		 * When a declaration is trimmed, by default it will be replaced by a code comment such as
-		 * "Excluded from this release type: exampleMember".  Set "omitTrimmingComments" to true to remove the
-		 * declaration completely.
-		 *
-		 * DEFAULT VALUE: false
-		 */
-		// "omitTrimmingComments": true
-	},
-
-	/**
-	 * Configures how the tsdoc-metadata.json file will be generated.
-	 */
-	"tsdocMetadata": {
-		/**
-		 * Whether to generate the tsdoc-metadata.json file.
-		 *
-		 * DEFAULT VALUE: true
-		 */
-		// "enabled": true,
-		/**
-		 * Specifies where the TSDoc metadata file should be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * The default value is "<lookup>", which causes the path to be automatically inferred from the "tsdocMetadata",
-		 * "typings" or "main" fields of the project's package.json.  If none of these fields are set, the lookup
-		 * falls back to "tsdoc-metadata.json" in the package folder.
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<lookup>"
-		 */
-		// "tsdocMetadataFilePath": "<projectFolder>/dist/tsdoc-metadata.json"
-	},
-
-	/**
-	 * Specifies what type of newlines API Extractor should use when writing output files.  By default, the output files
-	 * will be written with Windows-style newlines.  To use POSIX-style newlines, specify "lf" instead.
-	 * To use the OS's default newline kind, specify "os".
-	 *
-	 * DEFAULT VALUE: "crlf"
-	 */
-	"newlineKind": "lf",
-
-	/**
-	 * Configures how API Extractor reports error and warning messages produced during analysis.
-	 *
-	 * There are three sources of messages:  compiler messages, API Extractor messages, and TSDoc messages.
-	 */
-	"messages": {
-		/**
-		 * Configures handling of diagnostic messages reported by the TypeScript compiler engine while analyzing
-		 * the input .d.ts files.
-		 *
-		 * TypeScript message identifiers start with "TS" followed by an integer.  For example: "TS2551"
-		 *
-		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
-		 */
-		"compilerMessageReporting": {
-			/**
-			 * Configures the default routing for messages that don't match an explicit rule in this table.
-			 */
-			"default": {
-				/**
-				 * Specifies whether the message should be written to the the tool's output log.  Note that
-				 * the "addToApiReportFile" property may supersede this option.
-				 *
-				 * Possible values: "error", "warning", "none"
-				 *
-				 * Errors cause the build to fail and return a nonzero exit code.  Warnings cause a production build fail
-				 * and return a nonzero exit code.  For a non-production build (e.g. when "api-extractor run" includes
-				 * the "--local" option), the warning is displayed but the build will not fail.
-				 *
-				 * DEFAULT VALUE: "warning"
-				 */
-				"logLevel": "warning"
-
-				/**
-				 * When addToApiReportFile is true:  If API Extractor is configured to write an API report file (.api.md),
-				 * then the message will be written inside that file; otherwise, the message is instead logged according to
-				 * the "logLevel" option.
-				 *
-				 * DEFAULT VALUE: false
-				 */
-				// "addToApiReportFile": false
-			}
-
-			// "TS2551": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		},
-
-		/**
-		 * Configures handling of messages reported by API Extractor during its analysis.
-		 *
-		 * API Extractor message identifiers start with "ae-".  For example: "ae-extra-release-tag"
-		 *
-		 * DEFAULT VALUE: See api-extractor-defaults.json for the complete table of extractorMessageReporting mappings
-		 */
-		"extractorMessageReporting": {
-			"default": {
-				"logLevel": "warning"
-				// "addToApiReportFile": false
-			}
-
-			// "ae-extra-release-tag": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		},
-
-		/**
-		 * Configures handling of messages reported by the TSDoc parser when analyzing code comments.
-		 *
-		 * TSDoc message identifiers start with "tsdoc-".  For example: "tsdoc-link-tag-unescaped-text"
-		 *
-		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
-		 */
-		"tsdocMessageReporting": {
-			"default": {
-				"logLevel": "warning"
-				// "addToApiReportFile": false
-			}
-
-			// "tsdoc-link-tag-unescaped-text": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		}
-	}
+	"extends": "../../api-extractor.json"
 }
diff --git a/packages/proxy/package.json b/packages/proxy/package.json
index 6dd556d23..5108e66dc 100644
--- a/packages/proxy/package.json
+++ b/packages/proxy/package.json
@@ -8,7 +8,7 @@
 		"lint": "prettier --check . && cross-env TIMING=1 eslint src __tests__ --ext .mjs,.js,.ts --format=pretty",
 		"format": "prettier --write . && cross-env TIMING=1 eslint src __tests__ --ext .mjs,.js,.ts --fix --format=pretty",
 		"fmt": "yarn format",
-		"docs": "downlevel-dts dist docs/dist --to=3.7 && api-extractor run --local",
+		"docs": "api-extractor run --local",
 		"prepack": "yarn lint && yarn test && yarn build",
 		"changelog": "git cliff --prepend ./CHANGELOG.md -u -c ./cliff.toml -r ../../ --include-path 'packages/proxy/*'",
 		"release": "cliff-jumper"
@@ -66,7 +66,6 @@
 		"@types/supertest": "^2.0.12",
 		"@vitest/coverage-c8": "^0.24.1",
 		"cross-env": "^7.0.3",
-		"downlevel-dts": "^0.10.1",
 		"eslint": "^8.25.0",
 		"eslint-config-neon": "^0.1.38",
 		"eslint-formatter-pretty": "^4.1.0",
diff --git a/packages/rest/api-extractor.json b/packages/rest/api-extractor.json
index 823f95646..bc73f2cc0 100644
--- a/packages/rest/api-extractor.json
+++ b/packages/rest/api-extractor.json
@@ -1,376 +1,3 @@
-/**
- * Config file for API Extractor.  For more info, please visit: https://api-extractor.com
- */
 {
-	"$schema": "https://developer.microsoft.com/json-schemas/api-extractor/v7/api-extractor.schema.json",
-
-	/**
-	 * Optionally specifies another JSON config file that this file extends from.  This provides a way for
-	 * standard settings to be shared across multiple projects.
-	 *
-	 * If the path starts with "./" or "../", the path is resolved relative to the folder of the file that contains
-	 * the "extends" field.  Otherwise, the first path segment is interpreted as an NPM package name, and will be
-	 * resolved using NodeJS require().
-	 *
-	 * SUPPORTED TOKENS: none
-	 * DEFAULT VALUE: ""
-	 */
-	// "extends": "./shared/api-extractor-base.json"
-	// "extends": "my-package/include/api-extractor-base.json"
-
-	/**
-	 * Determines the "<projectFolder>" token that can be used with other config file settings.  The project folder
-	 * typically contains the tsconfig.json and package.json config files, but the path is user-defined.
-	 *
-	 * The path is resolved relative to the folder of the config file that contains the setting.
-	 *
-	 * The default value for "projectFolder" is the token "<lookup>", which means the folder is determined by traversing
-	 * parent folders, starting from the folder containing api-extractor.json, and stopping at the first folder
-	 * that contains a tsconfig.json file.  If a tsconfig.json file cannot be found in this way, then an error
-	 * will be reported.
-	 *
-	 * SUPPORTED TOKENS: <lookup>
-	 * DEFAULT VALUE: "<lookup>"
-	 */
-	// "projectFolder": "..",
-
-	/**
-	 * (REQUIRED) Specifies the .d.ts file to be used as the starting point for analysis.  API Extractor
-	 * analyzes the symbols exported by this module.
-	 *
-	 * The file extension must be ".d.ts" and not ".ts".
-	 *
-	 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-	 * prepend a folder token such as "<projectFolder>".
-	 *
-	 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-	 */
-	"mainEntryPointFilePath": "<projectFolder>/docs/dist/index.d.ts",
-
-	/**
-	 * A list of NPM package names whose exports should be treated as part of this package.
-	 *
-	 * For example, suppose that Webpack is used to generate a distributed bundle for the project "library1",
-	 * and another NPM package "library2" is embedded in this bundle.  Some types from library2 may become part
-	 * of the exported API for library1, but by default API Extractor would generate a .d.ts rollup that explicitly
-	 * imports library2.  To avoid this, we can specify:
-	 *
-	 *   "bundledPackages": [ "library2" ],
-	 *
-	 * This would direct API Extractor to embed those types directly in the .d.ts rollup, as if they had been
-	 * local files for library1.
-	 */
-	"bundledPackages": [],
-
-	/**
-	 * Determines how the TypeScript compiler engine will be invoked by API Extractor.
-	 */
-	"compiler": {
-		/**
-		 * Specifies the path to the tsconfig.json file to be used by API Extractor when analyzing the project.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * Note: This setting will be ignored if "overrideTsconfig" is used.
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/tsconfig.json"
-		 */
-		// "tsconfigFilePath": "<projectFolder>/tsconfig.json",
-		/**
-		 * Provides a compiler configuration that will be used instead of reading the tsconfig.json file from disk.
-		 * The object must conform to the TypeScript tsconfig schema:
-		 *
-		 * http://json.schemastore.org/tsconfig
-		 *
-		 * If omitted, then the tsconfig.json file will be read from the "projectFolder".
-		 *
-		 * DEFAULT VALUE: no overrideTsconfig section
-		 */
-		// "overrideTsconfig": {
-		//   . . .
-		// }
-		/**
-		 * This option causes the compiler to be invoked with the --skipLibCheck option. This option is not recommended
-		 * and may cause API Extractor to produce incomplete or incorrect declarations, but it may be required when
-		 * dependencies contain declarations that are incompatible with the TypeScript engine that API Extractor uses
-		 * for its analysis.  Where possible, the underlying issue should be fixed rather than relying on skipLibCheck.
-		 *
-		 * DEFAULT VALUE: false
-		 */
-		// "skipLibCheck": true,
-	},
-
-	/**
-	 * Configures how the API report file (*.api.md) will be generated.
-	 */
-	"apiReport": {
-		/**
-		 * (REQUIRED) Whether to generate an API report.
-		 */
-		"enabled": false
-
-		/**
-		 * The filename for the API report files.  It will be combined with "reportFolder" or "reportTempFolder" to produce
-		 * a full file path.
-		 *
-		 * The file extension should be ".api.md", and the string should not contain a path separator such as "\" or "/".
-		 *
-		 * SUPPORTED TOKENS: <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<unscopedPackageName>.api.md"
-		 */
-		// "reportFileName": "<unscopedPackageName>.api.md",
-
-		/**
-		 * Specifies the folder where the API report file is written.  The file name portion is determined by
-		 * the "reportFileName" setting.
-		 *
-		 * The API report file is normally tracked by Git.  Changes to it can be used to trigger a branch policy,
-		 * e.g. for an API review.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/"
-		 */
-		// "reportFolder": "<projectFolder>/temp/",
-
-		/**
-		 * Specifies the folder where the temporary report file is written.  The file name portion is determined by
-		 * the "reportFileName" setting.
-		 *
-		 * After the temporary file is written to disk, it is compared with the file in the "reportFolder".
-		 * If they are different, a production build will fail.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/"
-		 */
-		// "reportTempFolder": "<projectFolder>/temp/"
-	},
-
-	/**
-	 * Configures how the doc model file (*.api.json) will be generated.
-	 */
-	"docModel": {
-		/**
-		 * (REQUIRED) Whether to generate a doc model file.
-		 */
-		"enabled": true,
-
-		/**
-		 * The output path for the doc model file.  The file extension should be ".api.json".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/<unscopedPackageName>.api.json"
-		 */
-		"apiJsonFilePath": "<projectFolder>/docs/docs.api.json"
-	},
-
-	/**
-	 * Configures how the .d.ts rollup file will be generated.
-	 */
-	"dtsRollup": {
-		/**
-		 * (REQUIRED) Whether to generate the .d.ts rollup file.
-		 */
-		"enabled": false
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated without any trimming.
-		 * This file will include all declarations that are exported by the main entry point.
-		 *
-		 * If the path is an empty string, then this file will not be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/dist/<unscopedPackageName>.d.ts"
-		 */
-		// "untrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for an "alpha" release.
-		 * This file will include only declarations that are marked as "@public", "@beta", or "@alpha".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "alphaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-alpha.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "beta" release.
-		 * This file will include only declarations that are marked as "@public" or "@beta".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "betaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-beta.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "public" release.
-		 * This file will include only declarations that are marked as "@public".
-		 *
-		 * If the path is an empty string, then this file will not be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "publicTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-public.d.ts",
-
-		/**
-		 * When a declaration is trimmed, by default it will be replaced by a code comment such as
-		 * "Excluded from this release type: exampleMember".  Set "omitTrimmingComments" to true to remove the
-		 * declaration completely.
-		 *
-		 * DEFAULT VALUE: false
-		 */
-		// "omitTrimmingComments": true
-	},
-
-	/**
-	 * Configures how the tsdoc-metadata.json file will be generated.
-	 */
-	"tsdocMetadata": {
-		/**
-		 * Whether to generate the tsdoc-metadata.json file.
-		 *
-		 * DEFAULT VALUE: true
-		 */
-		// "enabled": true,
-		/**
-		 * Specifies where the TSDoc metadata file should be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * The default value is "<lookup>", which causes the path to be automatically inferred from the "tsdocMetadata",
-		 * "typings" or "main" fields of the project's package.json.  If none of these fields are set, the lookup
-		 * falls back to "tsdoc-metadata.json" in the package folder.
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<lookup>"
-		 */
-		// "tsdocMetadataFilePath": "<projectFolder>/dist/tsdoc-metadata.json"
-	},
-
-	/**
-	 * Specifies what type of newlines API Extractor should use when writing output files.  By default, the output files
-	 * will be written with Windows-style newlines.  To use POSIX-style newlines, specify "lf" instead.
-	 * To use the OS's default newline kind, specify "os".
-	 *
-	 * DEFAULT VALUE: "crlf"
-	 */
-	"newlineKind": "lf",
-
-	/**
-	 * Configures how API Extractor reports error and warning messages produced during analysis.
-	 *
-	 * There are three sources of messages:  compiler messages, API Extractor messages, and TSDoc messages.
-	 */
-	"messages": {
-		/**
-		 * Configures handling of diagnostic messages reported by the TypeScript compiler engine while analyzing
-		 * the input .d.ts files.
-		 *
-		 * TypeScript message identifiers start with "TS" followed by an integer.  For example: "TS2551"
-		 *
-		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
-		 */
-		"compilerMessageReporting": {
-			/**
-			 * Configures the default routing for messages that don't match an explicit rule in this table.
-			 */
-			"default": {
-				/**
-				 * Specifies whether the message should be written to the the tool's output log.  Note that
-				 * the "addToApiReportFile" property may supersede this option.
-				 *
-				 * Possible values: "error", "warning", "none"
-				 *
-				 * Errors cause the build to fail and return a nonzero exit code.  Warnings cause a production build fail
-				 * and return a nonzero exit code.  For a non-production build (e.g. when "api-extractor run" includes
-				 * the "--local" option), the warning is displayed but the build will not fail.
-				 *
-				 * DEFAULT VALUE: "warning"
-				 */
-				"logLevel": "warning"
-
-				/**
-				 * When addToApiReportFile is true:  If API Extractor is configured to write an API report file (.api.md),
-				 * then the message will be written inside that file; otherwise, the message is instead logged according to
-				 * the "logLevel" option.
-				 *
-				 * DEFAULT VALUE: false
-				 */
-				// "addToApiReportFile": false
-			}
-
-			// "TS2551": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		},
-
-		/**
-		 * Configures handling of messages reported by API Extractor during its analysis.
-		 *
-		 * API Extractor message identifiers start with "ae-".  For example: "ae-extra-release-tag"
-		 *
-		 * DEFAULT VALUE: See api-extractor-defaults.json for the complete table of extractorMessageReporting mappings
-		 */
-		"extractorMessageReporting": {
-			"default": {
-				"logLevel": "warning"
-				// "addToApiReportFile": false
-			}
-
-			// "ae-extra-release-tag": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		},
-
-		/**
-		 * Configures handling of messages reported by the TSDoc parser when analyzing code comments.
-		 *
-		 * TSDoc message identifiers start with "tsdoc-".  For example: "tsdoc-link-tag-unescaped-text"
-		 *
-		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
-		 */
-		"tsdocMessageReporting": {
-			"default": {
-				"logLevel": "warning"
-				// "addToApiReportFile": false
-			}
-
-			// "tsdoc-link-tag-unescaped-text": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		}
-	}
+	"extends": "../../api-extractor.json"
 }
diff --git a/packages/rest/package.json b/packages/rest/package.json
index b80c44503..908ebca56 100644
--- a/packages/rest/package.json
+++ b/packages/rest/package.json
@@ -8,7 +8,7 @@
 		"lint": "prettier --check . && cross-env TIMING=1 eslint src __tests__ --ext .mjs,.js,.ts --format=pretty",
 		"format": "prettier --write . && cross-env TIMING=1 eslint src __tests__ --ext .mjs,.js,.ts --fix --format=pretty",
 		"fmt": "yarn format",
-		"docs": "downlevel-dts dist docs/dist --to=3.7 && api-extractor run --local",
+		"docs": "api-extractor run --local",
 		"prepack": "yarn lint && yarn test && yarn build",
 		"changelog": "git cliff --prepend ./CHANGELOG.md -u -c ./cliff.toml -r ../../ --include-path 'packages/rest/*'",
 		"release": "cliff-jumper"
@@ -67,7 +67,6 @@
 		"@types/node": "16.11.64",
 		"@vitest/coverage-c8": "^0.24.1",
 		"cross-env": "^7.0.3",
-		"downlevel-dts": "^0.10.1",
 		"esbuild-plugin-version-injector": "^1.0.0",
 		"eslint": "^8.25.0",
 		"eslint-config-neon": "^0.1.38",
diff --git a/packages/scripts/src/template/default/api-extractor.json b/packages/scripts/src/template/default/api-extractor.json
index 3845fd481..bc73f2cc0 100644
--- a/packages/scripts/src/template/default/api-extractor.json
+++ b/packages/scripts/src/template/default/api-extractor.json
@@ -1,376 +1,3 @@
-/**
- * Config file for API Extractor.  For more info, please visit: https://api-extractor.com
- */
 {
-	"$schema": "https://developer.microsoft.com/json-schemas/api-extractor/v7/api-extractor.schema.json",
-
-	/**
-	 * Optionally specifies another JSON config file that this file extends from.  This provides a way for
-	 * standard settings to be shared across multiple projects.
-	 *
-	 * If the path starts with "./" or "../", the path is resolved relative to the folder of the file that contains
-	 * the "extends" field.  Otherwise, the first path segment is interpreted as an NPM package name, and will be
-	 * resolved using NodeJS require().
-	 *
-	 * SUPPORTED TOKENS: none
-	 * DEFAULT VALUE: ""
-	 */
-	// "extends": "./shared/api-extractor-base.json"
-	// "extends": "my-package/include/api-extractor-base.json"
-
-	/**
-	 * Determines the "<projectFolder>" token that can be used with other config file settings.  The project folder
-	 * typically contains the tsconfig.json and package.json config files, but the path is user-defined.
-	 *
-	 * The path is resolved relative to the folder of the config file that contains the setting.
-	 *
-	 * The default value for "projectFolder" is the token "<lookup>", which means the folder is determined by traversing
-	 * parent folders, starting from the folder containing api-extractor.json, and stopping at the first folder
-	 * that contains a tsconfig.json file.  If a tsconfig.json file cannot be found in this way, then an error
-	 * will be reported.
-	 *
-	 * SUPPORTED TOKENS: <lookup>
-	 * DEFAULT VALUE: "<lookup>"
-	 */
-	// "projectFolder": "..",
-
-	/**
-	 * (REQUIRED) Specifies the .d.ts file to be used as the starting point for analysis.  API Extractor
-	 * analyzes the symbols exported by this module.
-	 *
-	 * The file extension must be ".d.ts" and not ".ts".
-	 *
-	 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-	 * prepend a folder token such as "<projectFolder>".
-	 *
-	 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-	 */
-	"mainEntryPointFilePath": "<projectFolder>/dist/index.d.ts",
-
-	/**
-	 * A list of NPM package names whose exports should be treated as part of this package.
-	 *
-	 * For example, suppose that Webpack is used to generate a distributed bundle for the project "library1",
-	 * and another NPM package "library2" is embedded in this bundle.  Some types from library2 may become part
-	 * of the exported API for library1, but by default API Extractor would generate a .d.ts rollup that explicitly
-	 * imports library2.  To avoid this, we can specify:
-	 *
-	 *   "bundledPackages": [ "library2" ],
-	 *
-	 * This would direct API Extractor to embed those types directly in the .d.ts rollup, as if they had been
-	 * local files for library1.
-	 */
-	"bundledPackages": [],
-
-	/**
-	 * Determines how the TypeScript compiler engine will be invoked by API Extractor.
-	 */
-	"compiler": {
-		/**
-		 * Specifies the path to the tsconfig.json file to be used by API Extractor when analyzing the project.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * Note: This setting will be ignored if "overrideTsconfig" is used.
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/tsconfig.json"
-		 */
-		// "tsconfigFilePath": "<projectFolder>/tsconfig.json",
-		/**
-		 * Provides a compiler configuration that will be used instead of reading the tsconfig.json file from disk.
-		 * The object must conform to the TypeScript tsconfig schema:
-		 *
-		 * http://json.schemastore.org/tsconfig
-		 *
-		 * If omitted, then the tsconfig.json file will be read from the "projectFolder".
-		 *
-		 * DEFAULT VALUE: no overrideTsconfig section
-		 */
-		// "overrideTsconfig": {
-		//   . . .
-		// }
-		/**
-		 * This option causes the compiler to be invoked with the --skipLibCheck option. This option is not recommended
-		 * and may cause API Extractor to produce incomplete or incorrect declarations, but it may be required when
-		 * dependencies contain declarations that are incompatible with the TypeScript engine that API Extractor uses
-		 * for its analysis.  Where possible, the underlying issue should be fixed rather than relying on skipLibCheck.
-		 *
-		 * DEFAULT VALUE: false
-		 */
-		// "skipLibCheck": true,
-	},
-
-	/**
-	 * Configures how the API report file (*.api.md) will be generated.
-	 */
-	"apiReport": {
-		/**
-		 * (REQUIRED) Whether to generate an API report.
-		 */
-		"enabled": false
-
-		/**
-		 * The filename for the API report files.  It will be combined with "reportFolder" or "reportTempFolder" to produce
-		 * a full file path.
-		 *
-		 * The file extension should be ".api.md", and the string should not contain a path separator such as "\" or "/".
-		 *
-		 * SUPPORTED TOKENS: <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<unscopedPackageName>.api.md"
-		 */
-		// "reportFileName": "<unscopedPackageName>.api.md",
-
-		/**
-		 * Specifies the folder where the API report file is written.  The file name portion is determined by
-		 * the "reportFileName" setting.
-		 *
-		 * The API report file is normally tracked by Git.  Changes to it can be used to trigger a branch policy,
-		 * e.g. for an API review.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/"
-		 */
-		// "reportFolder": "<projectFolder>/temp/",
-
-		/**
-		 * Specifies the folder where the temporary report file is written.  The file name portion is determined by
-		 * the "reportFileName" setting.
-		 *
-		 * After the temporary file is written to disk, it is compared with the file in the "reportFolder".
-		 * If they are different, a production build will fail.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/"
-		 */
-		// "reportTempFolder": "<projectFolder>/temp/"
-	},
-
-	/**
-	 * Configures how the doc model file (*.api.json) will be generated.
-	 */
-	"docModel": {
-		/**
-		 * (REQUIRED) Whether to generate a doc model file.
-		 */
-		"enabled": true,
-
-		/**
-		 * The output path for the doc model file.  The file extension should be ".api.json".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/<unscopedPackageName>.api.json"
-		 */
-		"apiJsonFilePath": "<projectFolder>/docs/docs.api.json"
-	},
-
-	/**
-	 * Configures how the .d.ts rollup file will be generated.
-	 */
-	"dtsRollup": {
-		/**
-		 * (REQUIRED) Whether to generate the .d.ts rollup file.
-		 */
-		"enabled": false
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated without any trimming.
-		 * This file will include all declarations that are exported by the main entry point.
-		 *
-		 * If the path is an empty string, then this file will not be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/dist/<unscopedPackageName>.d.ts"
-		 */
-		// "untrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for an "alpha" release.
-		 * This file will include only declarations that are marked as "@public", "@beta", or "@alpha".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "alphaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-alpha.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "beta" release.
-		 * This file will include only declarations that are marked as "@public" or "@beta".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "betaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-beta.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "public" release.
-		 * This file will include only declarations that are marked as "@public".
-		 *
-		 * If the path is an empty string, then this file will not be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "publicTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-public.d.ts",
-
-		/**
-		 * When a declaration is trimmed, by default it will be replaced by a code comment such as
-		 * "Excluded from this release type: exampleMember".  Set "omitTrimmingComments" to true to remove the
-		 * declaration completely.
-		 *
-		 * DEFAULT VALUE: false
-		 */
-		// "omitTrimmingComments": true
-	},
-
-	/**
-	 * Configures how the tsdoc-metadata.json file will be generated.
-	 */
-	"tsdocMetadata": {
-		/**
-		 * Whether to generate the tsdoc-metadata.json file.
-		 *
-		 * DEFAULT VALUE: true
-		 */
-		// "enabled": true,
-		/**
-		 * Specifies where the TSDoc metadata file should be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * The default value is "<lookup>", which causes the path to be automatically inferred from the "tsdocMetadata",
-		 * "typings" or "main" fields of the project's package.json.  If none of these fields are set, the lookup
-		 * falls back to "tsdoc-metadata.json" in the package folder.
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<lookup>"
-		 */
-		// "tsdocMetadataFilePath": "<projectFolder>/dist/tsdoc-metadata.json"
-	},
-
-	/**
-	 * Specifies what type of newlines API Extractor should use when writing output files.  By default, the output files
-	 * will be written with Windows-style newlines.  To use POSIX-style newlines, specify "lf" instead.
-	 * To use the OS's default newline kind, specify "os".
-	 *
-	 * DEFAULT VALUE: "crlf"
-	 */
-	"newlineKind": "lf",
-
-	/**
-	 * Configures how API Extractor reports error and warning messages produced during analysis.
-	 *
-	 * There are three sources of messages:  compiler messages, API Extractor messages, and TSDoc messages.
-	 */
-	"messages": {
-		/**
-		 * Configures handling of diagnostic messages reported by the TypeScript compiler engine while analyzing
-		 * the input .d.ts files.
-		 *
-		 * TypeScript message identifiers start with "TS" followed by an integer.  For example: "TS2551"
-		 *
-		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
-		 */
-		"compilerMessageReporting": {
-			/**
-			 * Configures the default routing for messages that don't match an explicit rule in this table.
-			 */
-			"default": {
-				/**
-				 * Specifies whether the message should be written to the the tool's output log.  Note that
-				 * the "addToApiReportFile" property may supersede this option.
-				 *
-				 * Possible values: "error", "warning", "none"
-				 *
-				 * Errors cause the build to fail and return a nonzero exit code.  Warnings cause a production build fail
-				 * and return a nonzero exit code.  For a non-production build (e.g. when "api-extractor run" includes
-				 * the "--local" option), the warning is displayed but the build will not fail.
-				 *
-				 * DEFAULT VALUE: "warning"
-				 */
-				"logLevel": "warning"
-
-				/**
-				 * When addToApiReportFile is true:  If API Extractor is configured to write an API report file (.api.md),
-				 * then the message will be written inside that file; otherwise, the message is instead logged according to
-				 * the "logLevel" option.
-				 *
-				 * DEFAULT VALUE: false
-				 */
-				// "addToApiReportFile": false
-			}
-
-			// "TS2551": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		},
-
-		/**
-		 * Configures handling of messages reported by API Extractor during its analysis.
-		 *
-		 * API Extractor message identifiers start with "ae-".  For example: "ae-extra-release-tag"
-		 *
-		 * DEFAULT VALUE: See api-extractor-defaults.json for the complete table of extractorMessageReporting mappings
-		 */
-		"extractorMessageReporting": {
-			"default": {
-				"logLevel": "warning"
-				// "addToApiReportFile": false
-			}
-
-			// "ae-extra-release-tag": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		},
-
-		/**
-		 * Configures handling of messages reported by the TSDoc parser when analyzing code comments.
-		 *
-		 * TSDoc message identifiers start with "tsdoc-".  For example: "tsdoc-link-tag-unescaped-text"
-		 *
-		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
-		 */
-		"tsdocMessageReporting": {
-			"default": {
-				"logLevel": "warning"
-				// "addToApiReportFile": false
-			}
-
-			// "tsdoc-link-tag-unescaped-text": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		}
-	}
+	"extends": "../../api-extractor.json"
 }
diff --git a/packages/scripts/src/template/template.package.json b/packages/scripts/src/template/template.package.json
index 9e0595a83..0acb5b229 100644
--- a/packages/scripts/src/template/template.package.json
+++ b/packages/scripts/src/template/template.package.json
@@ -7,7 +7,7 @@
 		"build": "tsup",
 		"lint": "prettier --check . && cross-env TIMING=1 eslint src __tests__ --ext .mjs,.js,.ts --format=pretty",
 		"format": "prettier --write . && cross-env TIMING=1 eslint src __tests__ --ext .mjs,.js,.ts --fix --format=pretty",
-		"docs": "downlevel-dts dist docs/dist --to=3.7 && api-extractor run --local",
+		"docs": "api-extractor run --local",
 		"prepack": "yarn build && yarn lint",
 		"changelog": "git cliff --prepend ./CHANGELOG.md -u -c ./cliff.toml -r ../../ --include-path 'packages/{name}/*'",
 		"release": "cliff-jumper"
diff --git a/packages/ui/api-extractor.json b/packages/ui/api-extractor.json
index 3845fd481..bc73f2cc0 100644
--- a/packages/ui/api-extractor.json
+++ b/packages/ui/api-extractor.json
@@ -1,376 +1,3 @@
-/**
- * Config file for API Extractor.  For more info, please visit: https://api-extractor.com
- */
 {
-	"$schema": "https://developer.microsoft.com/json-schemas/api-extractor/v7/api-extractor.schema.json",
-
-	/**
-	 * Optionally specifies another JSON config file that this file extends from.  This provides a way for
-	 * standard settings to be shared across multiple projects.
-	 *
-	 * If the path starts with "./" or "../", the path is resolved relative to the folder of the file that contains
-	 * the "extends" field.  Otherwise, the first path segment is interpreted as an NPM package name, and will be
-	 * resolved using NodeJS require().
-	 *
-	 * SUPPORTED TOKENS: none
-	 * DEFAULT VALUE: ""
-	 */
-	// "extends": "./shared/api-extractor-base.json"
-	// "extends": "my-package/include/api-extractor-base.json"
-
-	/**
-	 * Determines the "<projectFolder>" token that can be used with other config file settings.  The project folder
-	 * typically contains the tsconfig.json and package.json config files, but the path is user-defined.
-	 *
-	 * The path is resolved relative to the folder of the config file that contains the setting.
-	 *
-	 * The default value for "projectFolder" is the token "<lookup>", which means the folder is determined by traversing
-	 * parent folders, starting from the folder containing api-extractor.json, and stopping at the first folder
-	 * that contains a tsconfig.json file.  If a tsconfig.json file cannot be found in this way, then an error
-	 * will be reported.
-	 *
-	 * SUPPORTED TOKENS: <lookup>
-	 * DEFAULT VALUE: "<lookup>"
-	 */
-	// "projectFolder": "..",
-
-	/**
-	 * (REQUIRED) Specifies the .d.ts file to be used as the starting point for analysis.  API Extractor
-	 * analyzes the symbols exported by this module.
-	 *
-	 * The file extension must be ".d.ts" and not ".ts".
-	 *
-	 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-	 * prepend a folder token such as "<projectFolder>".
-	 *
-	 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-	 */
-	"mainEntryPointFilePath": "<projectFolder>/dist/index.d.ts",
-
-	/**
-	 * A list of NPM package names whose exports should be treated as part of this package.
-	 *
-	 * For example, suppose that Webpack is used to generate a distributed bundle for the project "library1",
-	 * and another NPM package "library2" is embedded in this bundle.  Some types from library2 may become part
-	 * of the exported API for library1, but by default API Extractor would generate a .d.ts rollup that explicitly
-	 * imports library2.  To avoid this, we can specify:
-	 *
-	 *   "bundledPackages": [ "library2" ],
-	 *
-	 * This would direct API Extractor to embed those types directly in the .d.ts rollup, as if they had been
-	 * local files for library1.
-	 */
-	"bundledPackages": [],
-
-	/**
-	 * Determines how the TypeScript compiler engine will be invoked by API Extractor.
-	 */
-	"compiler": {
-		/**
-		 * Specifies the path to the tsconfig.json file to be used by API Extractor when analyzing the project.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * Note: This setting will be ignored if "overrideTsconfig" is used.
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/tsconfig.json"
-		 */
-		// "tsconfigFilePath": "<projectFolder>/tsconfig.json",
-		/**
-		 * Provides a compiler configuration that will be used instead of reading the tsconfig.json file from disk.
-		 * The object must conform to the TypeScript tsconfig schema:
-		 *
-		 * http://json.schemastore.org/tsconfig
-		 *
-		 * If omitted, then the tsconfig.json file will be read from the "projectFolder".
-		 *
-		 * DEFAULT VALUE: no overrideTsconfig section
-		 */
-		// "overrideTsconfig": {
-		//   . . .
-		// }
-		/**
-		 * This option causes the compiler to be invoked with the --skipLibCheck option. This option is not recommended
-		 * and may cause API Extractor to produce incomplete or incorrect declarations, but it may be required when
-		 * dependencies contain declarations that are incompatible with the TypeScript engine that API Extractor uses
-		 * for its analysis.  Where possible, the underlying issue should be fixed rather than relying on skipLibCheck.
-		 *
-		 * DEFAULT VALUE: false
-		 */
-		// "skipLibCheck": true,
-	},
-
-	/**
-	 * Configures how the API report file (*.api.md) will be generated.
-	 */
-	"apiReport": {
-		/**
-		 * (REQUIRED) Whether to generate an API report.
-		 */
-		"enabled": false
-
-		/**
-		 * The filename for the API report files.  It will be combined with "reportFolder" or "reportTempFolder" to produce
-		 * a full file path.
-		 *
-		 * The file extension should be ".api.md", and the string should not contain a path separator such as "\" or "/".
-		 *
-		 * SUPPORTED TOKENS: <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<unscopedPackageName>.api.md"
-		 */
-		// "reportFileName": "<unscopedPackageName>.api.md",
-
-		/**
-		 * Specifies the folder where the API report file is written.  The file name portion is determined by
-		 * the "reportFileName" setting.
-		 *
-		 * The API report file is normally tracked by Git.  Changes to it can be used to trigger a branch policy,
-		 * e.g. for an API review.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/"
-		 */
-		// "reportFolder": "<projectFolder>/temp/",
-
-		/**
-		 * Specifies the folder where the temporary report file is written.  The file name portion is determined by
-		 * the "reportFileName" setting.
-		 *
-		 * After the temporary file is written to disk, it is compared with the file in the "reportFolder".
-		 * If they are different, a production build will fail.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/"
-		 */
-		// "reportTempFolder": "<projectFolder>/temp/"
-	},
-
-	/**
-	 * Configures how the doc model file (*.api.json) will be generated.
-	 */
-	"docModel": {
-		/**
-		 * (REQUIRED) Whether to generate a doc model file.
-		 */
-		"enabled": true,
-
-		/**
-		 * The output path for the doc model file.  The file extension should be ".api.json".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/<unscopedPackageName>.api.json"
-		 */
-		"apiJsonFilePath": "<projectFolder>/docs/docs.api.json"
-	},
-
-	/**
-	 * Configures how the .d.ts rollup file will be generated.
-	 */
-	"dtsRollup": {
-		/**
-		 * (REQUIRED) Whether to generate the .d.ts rollup file.
-		 */
-		"enabled": false
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated without any trimming.
-		 * This file will include all declarations that are exported by the main entry point.
-		 *
-		 * If the path is an empty string, then this file will not be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/dist/<unscopedPackageName>.d.ts"
-		 */
-		// "untrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for an "alpha" release.
-		 * This file will include only declarations that are marked as "@public", "@beta", or "@alpha".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "alphaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-alpha.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "beta" release.
-		 * This file will include only declarations that are marked as "@public" or "@beta".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "betaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-beta.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "public" release.
-		 * This file will include only declarations that are marked as "@public".
-		 *
-		 * If the path is an empty string, then this file will not be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "publicTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-public.d.ts",
-
-		/**
-		 * When a declaration is trimmed, by default it will be replaced by a code comment such as
-		 * "Excluded from this release type: exampleMember".  Set "omitTrimmingComments" to true to remove the
-		 * declaration completely.
-		 *
-		 * DEFAULT VALUE: false
-		 */
-		// "omitTrimmingComments": true
-	},
-
-	/**
-	 * Configures how the tsdoc-metadata.json file will be generated.
-	 */
-	"tsdocMetadata": {
-		/**
-		 * Whether to generate the tsdoc-metadata.json file.
-		 *
-		 * DEFAULT VALUE: true
-		 */
-		// "enabled": true,
-		/**
-		 * Specifies where the TSDoc metadata file should be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * The default value is "<lookup>", which causes the path to be automatically inferred from the "tsdocMetadata",
-		 * "typings" or "main" fields of the project's package.json.  If none of these fields are set, the lookup
-		 * falls back to "tsdoc-metadata.json" in the package folder.
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<lookup>"
-		 */
-		// "tsdocMetadataFilePath": "<projectFolder>/dist/tsdoc-metadata.json"
-	},
-
-	/**
-	 * Specifies what type of newlines API Extractor should use when writing output files.  By default, the output files
-	 * will be written with Windows-style newlines.  To use POSIX-style newlines, specify "lf" instead.
-	 * To use the OS's default newline kind, specify "os".
-	 *
-	 * DEFAULT VALUE: "crlf"
-	 */
-	"newlineKind": "lf",
-
-	/**
-	 * Configures how API Extractor reports error and warning messages produced during analysis.
-	 *
-	 * There are three sources of messages:  compiler messages, API Extractor messages, and TSDoc messages.
-	 */
-	"messages": {
-		/**
-		 * Configures handling of diagnostic messages reported by the TypeScript compiler engine while analyzing
-		 * the input .d.ts files.
-		 *
-		 * TypeScript message identifiers start with "TS" followed by an integer.  For example: "TS2551"
-		 *
-		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
-		 */
-		"compilerMessageReporting": {
-			/**
-			 * Configures the default routing for messages that don't match an explicit rule in this table.
-			 */
-			"default": {
-				/**
-				 * Specifies whether the message should be written to the the tool's output log.  Note that
-				 * the "addToApiReportFile" property may supersede this option.
-				 *
-				 * Possible values: "error", "warning", "none"
-				 *
-				 * Errors cause the build to fail and return a nonzero exit code.  Warnings cause a production build fail
-				 * and return a nonzero exit code.  For a non-production build (e.g. when "api-extractor run" includes
-				 * the "--local" option), the warning is displayed but the build will not fail.
-				 *
-				 * DEFAULT VALUE: "warning"
-				 */
-				"logLevel": "warning"
-
-				/**
-				 * When addToApiReportFile is true:  If API Extractor is configured to write an API report file (.api.md),
-				 * then the message will be written inside that file; otherwise, the message is instead logged according to
-				 * the "logLevel" option.
-				 *
-				 * DEFAULT VALUE: false
-				 */
-				// "addToApiReportFile": false
-			}
-
-			// "TS2551": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		},
-
-		/**
-		 * Configures handling of messages reported by API Extractor during its analysis.
-		 *
-		 * API Extractor message identifiers start with "ae-".  For example: "ae-extra-release-tag"
-		 *
-		 * DEFAULT VALUE: See api-extractor-defaults.json for the complete table of extractorMessageReporting mappings
-		 */
-		"extractorMessageReporting": {
-			"default": {
-				"logLevel": "warning"
-				// "addToApiReportFile": false
-			}
-
-			// "ae-extra-release-tag": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		},
-
-		/**
-		 * Configures handling of messages reported by the TSDoc parser when analyzing code comments.
-		 *
-		 * TSDoc message identifiers start with "tsdoc-".  For example: "tsdoc-link-tag-unescaped-text"
-		 *
-		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
-		 */
-		"tsdocMessageReporting": {
-			"default": {
-				"logLevel": "warning"
-				// "addToApiReportFile": false
-			}
-
-			// "tsdoc-link-tag-unescaped-text": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		}
-	}
+	"extends": "../../api-extractor.json"
 }
diff --git a/packages/util/api-extractor.json b/packages/util/api-extractor.json
index 823f95646..bc73f2cc0 100644
--- a/packages/util/api-extractor.json
+++ b/packages/util/api-extractor.json
@@ -1,376 +1,3 @@
-/**
- * Config file for API Extractor.  For more info, please visit: https://api-extractor.com
- */
 {
-	"$schema": "https://developer.microsoft.com/json-schemas/api-extractor/v7/api-extractor.schema.json",
-
-	/**
-	 * Optionally specifies another JSON config file that this file extends from.  This provides a way for
-	 * standard settings to be shared across multiple projects.
-	 *
-	 * If the path starts with "./" or "../", the path is resolved relative to the folder of the file that contains
-	 * the "extends" field.  Otherwise, the first path segment is interpreted as an NPM package name, and will be
-	 * resolved using NodeJS require().
-	 *
-	 * SUPPORTED TOKENS: none
-	 * DEFAULT VALUE: ""
-	 */
-	// "extends": "./shared/api-extractor-base.json"
-	// "extends": "my-package/include/api-extractor-base.json"
-
-	/**
-	 * Determines the "<projectFolder>" token that can be used with other config file settings.  The project folder
-	 * typically contains the tsconfig.json and package.json config files, but the path is user-defined.
-	 *
-	 * The path is resolved relative to the folder of the config file that contains the setting.
-	 *
-	 * The default value for "projectFolder" is the token "<lookup>", which means the folder is determined by traversing
-	 * parent folders, starting from the folder containing api-extractor.json, and stopping at the first folder
-	 * that contains a tsconfig.json file.  If a tsconfig.json file cannot be found in this way, then an error
-	 * will be reported.
-	 *
-	 * SUPPORTED TOKENS: <lookup>
-	 * DEFAULT VALUE: "<lookup>"
-	 */
-	// "projectFolder": "..",
-
-	/**
-	 * (REQUIRED) Specifies the .d.ts file to be used as the starting point for analysis.  API Extractor
-	 * analyzes the symbols exported by this module.
-	 *
-	 * The file extension must be ".d.ts" and not ".ts".
-	 *
-	 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-	 * prepend a folder token such as "<projectFolder>".
-	 *
-	 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-	 */
-	"mainEntryPointFilePath": "<projectFolder>/docs/dist/index.d.ts",
-
-	/**
-	 * A list of NPM package names whose exports should be treated as part of this package.
-	 *
-	 * For example, suppose that Webpack is used to generate a distributed bundle for the project "library1",
-	 * and another NPM package "library2" is embedded in this bundle.  Some types from library2 may become part
-	 * of the exported API for library1, but by default API Extractor would generate a .d.ts rollup that explicitly
-	 * imports library2.  To avoid this, we can specify:
-	 *
-	 *   "bundledPackages": [ "library2" ],
-	 *
-	 * This would direct API Extractor to embed those types directly in the .d.ts rollup, as if they had been
-	 * local files for library1.
-	 */
-	"bundledPackages": [],
-
-	/**
-	 * Determines how the TypeScript compiler engine will be invoked by API Extractor.
-	 */
-	"compiler": {
-		/**
-		 * Specifies the path to the tsconfig.json file to be used by API Extractor when analyzing the project.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * Note: This setting will be ignored if "overrideTsconfig" is used.
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/tsconfig.json"
-		 */
-		// "tsconfigFilePath": "<projectFolder>/tsconfig.json",
-		/**
-		 * Provides a compiler configuration that will be used instead of reading the tsconfig.json file from disk.
-		 * The object must conform to the TypeScript tsconfig schema:
-		 *
-		 * http://json.schemastore.org/tsconfig
-		 *
-		 * If omitted, then the tsconfig.json file will be read from the "projectFolder".
-		 *
-		 * DEFAULT VALUE: no overrideTsconfig section
-		 */
-		// "overrideTsconfig": {
-		//   . . .
-		// }
-		/**
-		 * This option causes the compiler to be invoked with the --skipLibCheck option. This option is not recommended
-		 * and may cause API Extractor to produce incomplete or incorrect declarations, but it may be required when
-		 * dependencies contain declarations that are incompatible with the TypeScript engine that API Extractor uses
-		 * for its analysis.  Where possible, the underlying issue should be fixed rather than relying on skipLibCheck.
-		 *
-		 * DEFAULT VALUE: false
-		 */
-		// "skipLibCheck": true,
-	},
-
-	/**
-	 * Configures how the API report file (*.api.md) will be generated.
-	 */
-	"apiReport": {
-		/**
-		 * (REQUIRED) Whether to generate an API report.
-		 */
-		"enabled": false
-
-		/**
-		 * The filename for the API report files.  It will be combined with "reportFolder" or "reportTempFolder" to produce
-		 * a full file path.
-		 *
-		 * The file extension should be ".api.md", and the string should not contain a path separator such as "\" or "/".
-		 *
-		 * SUPPORTED TOKENS: <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<unscopedPackageName>.api.md"
-		 */
-		// "reportFileName": "<unscopedPackageName>.api.md",
-
-		/**
-		 * Specifies the folder where the API report file is written.  The file name portion is determined by
-		 * the "reportFileName" setting.
-		 *
-		 * The API report file is normally tracked by Git.  Changes to it can be used to trigger a branch policy,
-		 * e.g. for an API review.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/"
-		 */
-		// "reportFolder": "<projectFolder>/temp/",
-
-		/**
-		 * Specifies the folder where the temporary report file is written.  The file name portion is determined by
-		 * the "reportFileName" setting.
-		 *
-		 * After the temporary file is written to disk, it is compared with the file in the "reportFolder".
-		 * If they are different, a production build will fail.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/"
-		 */
-		// "reportTempFolder": "<projectFolder>/temp/"
-	},
-
-	/**
-	 * Configures how the doc model file (*.api.json) will be generated.
-	 */
-	"docModel": {
-		/**
-		 * (REQUIRED) Whether to generate a doc model file.
-		 */
-		"enabled": true,
-
-		/**
-		 * The output path for the doc model file.  The file extension should be ".api.json".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/<unscopedPackageName>.api.json"
-		 */
-		"apiJsonFilePath": "<projectFolder>/docs/docs.api.json"
-	},
-
-	/**
-	 * Configures how the .d.ts rollup file will be generated.
-	 */
-	"dtsRollup": {
-		/**
-		 * (REQUIRED) Whether to generate the .d.ts rollup file.
-		 */
-		"enabled": false
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated without any trimming.
-		 * This file will include all declarations that are exported by the main entry point.
-		 *
-		 * If the path is an empty string, then this file will not be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/dist/<unscopedPackageName>.d.ts"
-		 */
-		// "untrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for an "alpha" release.
-		 * This file will include only declarations that are marked as "@public", "@beta", or "@alpha".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "alphaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-alpha.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "beta" release.
-		 * This file will include only declarations that are marked as "@public" or "@beta".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "betaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-beta.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "public" release.
-		 * This file will include only declarations that are marked as "@public".
-		 *
-		 * If the path is an empty string, then this file will not be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "publicTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-public.d.ts",
-
-		/**
-		 * When a declaration is trimmed, by default it will be replaced by a code comment such as
-		 * "Excluded from this release type: exampleMember".  Set "omitTrimmingComments" to true to remove the
-		 * declaration completely.
-		 *
-		 * DEFAULT VALUE: false
-		 */
-		// "omitTrimmingComments": true
-	},
-
-	/**
-	 * Configures how the tsdoc-metadata.json file will be generated.
-	 */
-	"tsdocMetadata": {
-		/**
-		 * Whether to generate the tsdoc-metadata.json file.
-		 *
-		 * DEFAULT VALUE: true
-		 */
-		// "enabled": true,
-		/**
-		 * Specifies where the TSDoc metadata file should be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * The default value is "<lookup>", which causes the path to be automatically inferred from the "tsdocMetadata",
-		 * "typings" or "main" fields of the project's package.json.  If none of these fields are set, the lookup
-		 * falls back to "tsdoc-metadata.json" in the package folder.
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<lookup>"
-		 */
-		// "tsdocMetadataFilePath": "<projectFolder>/dist/tsdoc-metadata.json"
-	},
-
-	/**
-	 * Specifies what type of newlines API Extractor should use when writing output files.  By default, the output files
-	 * will be written with Windows-style newlines.  To use POSIX-style newlines, specify "lf" instead.
-	 * To use the OS's default newline kind, specify "os".
-	 *
-	 * DEFAULT VALUE: "crlf"
-	 */
-	"newlineKind": "lf",
-
-	/**
-	 * Configures how API Extractor reports error and warning messages produced during analysis.
-	 *
-	 * There are three sources of messages:  compiler messages, API Extractor messages, and TSDoc messages.
-	 */
-	"messages": {
-		/**
-		 * Configures handling of diagnostic messages reported by the TypeScript compiler engine while analyzing
-		 * the input .d.ts files.
-		 *
-		 * TypeScript message identifiers start with "TS" followed by an integer.  For example: "TS2551"
-		 *
-		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
-		 */
-		"compilerMessageReporting": {
-			/**
-			 * Configures the default routing for messages that don't match an explicit rule in this table.
-			 */
-			"default": {
-				/**
-				 * Specifies whether the message should be written to the the tool's output log.  Note that
-				 * the "addToApiReportFile" property may supersede this option.
-				 *
-				 * Possible values: "error", "warning", "none"
-				 *
-				 * Errors cause the build to fail and return a nonzero exit code.  Warnings cause a production build fail
-				 * and return a nonzero exit code.  For a non-production build (e.g. when "api-extractor run" includes
-				 * the "--local" option), the warning is displayed but the build will not fail.
-				 *
-				 * DEFAULT VALUE: "warning"
-				 */
-				"logLevel": "warning"
-
-				/**
-				 * When addToApiReportFile is true:  If API Extractor is configured to write an API report file (.api.md),
-				 * then the message will be written inside that file; otherwise, the message is instead logged according to
-				 * the "logLevel" option.
-				 *
-				 * DEFAULT VALUE: false
-				 */
-				// "addToApiReportFile": false
-			}
-
-			// "TS2551": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		},
-
-		/**
-		 * Configures handling of messages reported by API Extractor during its analysis.
-		 *
-		 * API Extractor message identifiers start with "ae-".  For example: "ae-extra-release-tag"
-		 *
-		 * DEFAULT VALUE: See api-extractor-defaults.json for the complete table of extractorMessageReporting mappings
-		 */
-		"extractorMessageReporting": {
-			"default": {
-				"logLevel": "warning"
-				// "addToApiReportFile": false
-			}
-
-			// "ae-extra-release-tag": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		},
-
-		/**
-		 * Configures handling of messages reported by the TSDoc parser when analyzing code comments.
-		 *
-		 * TSDoc message identifiers start with "tsdoc-".  For example: "tsdoc-link-tag-unescaped-text"
-		 *
-		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
-		 */
-		"tsdocMessageReporting": {
-			"default": {
-				"logLevel": "warning"
-				// "addToApiReportFile": false
-			}
-
-			// "tsdoc-link-tag-unescaped-text": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		}
-	}
+	"extends": "../../api-extractor.json"
 }
diff --git a/packages/util/package.json b/packages/util/package.json
index bb4a354a6..4089231d9 100644
--- a/packages/util/package.json
+++ b/packages/util/package.json
@@ -8,7 +8,7 @@
 		"lint": "prettier --check . && TIMING=1 eslint src --ext .mjs,.js,.ts --format=pretty",
 		"format": "prettier --write . && TIMING=1 eslint src --ext .mjs,.js,.ts --fix --format=pretty",
 		"fmt": "yarn format",
-		"docs": "downlevel-dts dist docs/dist --to=3.7 && api-extractor run --local",
+		"docs": "api-extractor run --local",
 		"prepack": "yarn lint && yarn test && yarn build",
 		"changelog": "git cliff --prepend ./CHANGELOG.md -u -c ./cliff.toml -r ../../ --include-path 'packages/util/*'",
 		"release": "cliff-jumper"
@@ -56,7 +56,6 @@
 		"@types/node": "16.11.64",
 		"@vitest/coverage-c8": "^0.24.1",
 		"cross-env": "^7.0.3",
-		"downlevel-dts": "^0.10.1",
 		"eslint": "^8.25.0",
 		"eslint-config-neon": "^0.1.38",
 		"eslint-formatter-pretty": "^4.1.0",
diff --git a/packages/voice/api-extractor.json b/packages/voice/api-extractor.json
index 823f95646..bc73f2cc0 100644
--- a/packages/voice/api-extractor.json
+++ b/packages/voice/api-extractor.json
@@ -1,376 +1,3 @@
-/**
- * Config file for API Extractor.  For more info, please visit: https://api-extractor.com
- */
 {
-	"$schema": "https://developer.microsoft.com/json-schemas/api-extractor/v7/api-extractor.schema.json",
-
-	/**
-	 * Optionally specifies another JSON config file that this file extends from.  This provides a way for
-	 * standard settings to be shared across multiple projects.
-	 *
-	 * If the path starts with "./" or "../", the path is resolved relative to the folder of the file that contains
-	 * the "extends" field.  Otherwise, the first path segment is interpreted as an NPM package name, and will be
-	 * resolved using NodeJS require().
-	 *
-	 * SUPPORTED TOKENS: none
-	 * DEFAULT VALUE: ""
-	 */
-	// "extends": "./shared/api-extractor-base.json"
-	// "extends": "my-package/include/api-extractor-base.json"
-
-	/**
-	 * Determines the "<projectFolder>" token that can be used with other config file settings.  The project folder
-	 * typically contains the tsconfig.json and package.json config files, but the path is user-defined.
-	 *
-	 * The path is resolved relative to the folder of the config file that contains the setting.
-	 *
-	 * The default value for "projectFolder" is the token "<lookup>", which means the folder is determined by traversing
-	 * parent folders, starting from the folder containing api-extractor.json, and stopping at the first folder
-	 * that contains a tsconfig.json file.  If a tsconfig.json file cannot be found in this way, then an error
-	 * will be reported.
-	 *
-	 * SUPPORTED TOKENS: <lookup>
-	 * DEFAULT VALUE: "<lookup>"
-	 */
-	// "projectFolder": "..",
-
-	/**
-	 * (REQUIRED) Specifies the .d.ts file to be used as the starting point for analysis.  API Extractor
-	 * analyzes the symbols exported by this module.
-	 *
-	 * The file extension must be ".d.ts" and not ".ts".
-	 *
-	 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-	 * prepend a folder token such as "<projectFolder>".
-	 *
-	 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-	 */
-	"mainEntryPointFilePath": "<projectFolder>/docs/dist/index.d.ts",
-
-	/**
-	 * A list of NPM package names whose exports should be treated as part of this package.
-	 *
-	 * For example, suppose that Webpack is used to generate a distributed bundle for the project "library1",
-	 * and another NPM package "library2" is embedded in this bundle.  Some types from library2 may become part
-	 * of the exported API for library1, but by default API Extractor would generate a .d.ts rollup that explicitly
-	 * imports library2.  To avoid this, we can specify:
-	 *
-	 *   "bundledPackages": [ "library2" ],
-	 *
-	 * This would direct API Extractor to embed those types directly in the .d.ts rollup, as if they had been
-	 * local files for library1.
-	 */
-	"bundledPackages": [],
-
-	/**
-	 * Determines how the TypeScript compiler engine will be invoked by API Extractor.
-	 */
-	"compiler": {
-		/**
-		 * Specifies the path to the tsconfig.json file to be used by API Extractor when analyzing the project.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * Note: This setting will be ignored if "overrideTsconfig" is used.
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/tsconfig.json"
-		 */
-		// "tsconfigFilePath": "<projectFolder>/tsconfig.json",
-		/**
-		 * Provides a compiler configuration that will be used instead of reading the tsconfig.json file from disk.
-		 * The object must conform to the TypeScript tsconfig schema:
-		 *
-		 * http://json.schemastore.org/tsconfig
-		 *
-		 * If omitted, then the tsconfig.json file will be read from the "projectFolder".
-		 *
-		 * DEFAULT VALUE: no overrideTsconfig section
-		 */
-		// "overrideTsconfig": {
-		//   . . .
-		// }
-		/**
-		 * This option causes the compiler to be invoked with the --skipLibCheck option. This option is not recommended
-		 * and may cause API Extractor to produce incomplete or incorrect declarations, but it may be required when
-		 * dependencies contain declarations that are incompatible with the TypeScript engine that API Extractor uses
-		 * for its analysis.  Where possible, the underlying issue should be fixed rather than relying on skipLibCheck.
-		 *
-		 * DEFAULT VALUE: false
-		 */
-		// "skipLibCheck": true,
-	},
-
-	/**
-	 * Configures how the API report file (*.api.md) will be generated.
-	 */
-	"apiReport": {
-		/**
-		 * (REQUIRED) Whether to generate an API report.
-		 */
-		"enabled": false
-
-		/**
-		 * The filename for the API report files.  It will be combined with "reportFolder" or "reportTempFolder" to produce
-		 * a full file path.
-		 *
-		 * The file extension should be ".api.md", and the string should not contain a path separator such as "\" or "/".
-		 *
-		 * SUPPORTED TOKENS: <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<unscopedPackageName>.api.md"
-		 */
-		// "reportFileName": "<unscopedPackageName>.api.md",
-
-		/**
-		 * Specifies the folder where the API report file is written.  The file name portion is determined by
-		 * the "reportFileName" setting.
-		 *
-		 * The API report file is normally tracked by Git.  Changes to it can be used to trigger a branch policy,
-		 * e.g. for an API review.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/"
-		 */
-		// "reportFolder": "<projectFolder>/temp/",
-
-		/**
-		 * Specifies the folder where the temporary report file is written.  The file name portion is determined by
-		 * the "reportFileName" setting.
-		 *
-		 * After the temporary file is written to disk, it is compared with the file in the "reportFolder".
-		 * If they are different, a production build will fail.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/"
-		 */
-		// "reportTempFolder": "<projectFolder>/temp/"
-	},
-
-	/**
-	 * Configures how the doc model file (*.api.json) will be generated.
-	 */
-	"docModel": {
-		/**
-		 * (REQUIRED) Whether to generate a doc model file.
-		 */
-		"enabled": true,
-
-		/**
-		 * The output path for the doc model file.  The file extension should be ".api.json".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/<unscopedPackageName>.api.json"
-		 */
-		"apiJsonFilePath": "<projectFolder>/docs/docs.api.json"
-	},
-
-	/**
-	 * Configures how the .d.ts rollup file will be generated.
-	 */
-	"dtsRollup": {
-		/**
-		 * (REQUIRED) Whether to generate the .d.ts rollup file.
-		 */
-		"enabled": false
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated without any trimming.
-		 * This file will include all declarations that are exported by the main entry point.
-		 *
-		 * If the path is an empty string, then this file will not be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/dist/<unscopedPackageName>.d.ts"
-		 */
-		// "untrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for an "alpha" release.
-		 * This file will include only declarations that are marked as "@public", "@beta", or "@alpha".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "alphaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-alpha.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "beta" release.
-		 * This file will include only declarations that are marked as "@public" or "@beta".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "betaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-beta.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "public" release.
-		 * This file will include only declarations that are marked as "@public".
-		 *
-		 * If the path is an empty string, then this file will not be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "publicTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-public.d.ts",
-
-		/**
-		 * When a declaration is trimmed, by default it will be replaced by a code comment such as
-		 * "Excluded from this release type: exampleMember".  Set "omitTrimmingComments" to true to remove the
-		 * declaration completely.
-		 *
-		 * DEFAULT VALUE: false
-		 */
-		// "omitTrimmingComments": true
-	},
-
-	/**
-	 * Configures how the tsdoc-metadata.json file will be generated.
-	 */
-	"tsdocMetadata": {
-		/**
-		 * Whether to generate the tsdoc-metadata.json file.
-		 *
-		 * DEFAULT VALUE: true
-		 */
-		// "enabled": true,
-		/**
-		 * Specifies where the TSDoc metadata file should be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * The default value is "<lookup>", which causes the path to be automatically inferred from the "tsdocMetadata",
-		 * "typings" or "main" fields of the project's package.json.  If none of these fields are set, the lookup
-		 * falls back to "tsdoc-metadata.json" in the package folder.
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<lookup>"
-		 */
-		// "tsdocMetadataFilePath": "<projectFolder>/dist/tsdoc-metadata.json"
-	},
-
-	/**
-	 * Specifies what type of newlines API Extractor should use when writing output files.  By default, the output files
-	 * will be written with Windows-style newlines.  To use POSIX-style newlines, specify "lf" instead.
-	 * To use the OS's default newline kind, specify "os".
-	 *
-	 * DEFAULT VALUE: "crlf"
-	 */
-	"newlineKind": "lf",
-
-	/**
-	 * Configures how API Extractor reports error and warning messages produced during analysis.
-	 *
-	 * There are three sources of messages:  compiler messages, API Extractor messages, and TSDoc messages.
-	 */
-	"messages": {
-		/**
-		 * Configures handling of diagnostic messages reported by the TypeScript compiler engine while analyzing
-		 * the input .d.ts files.
-		 *
-		 * TypeScript message identifiers start with "TS" followed by an integer.  For example: "TS2551"
-		 *
-		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
-		 */
-		"compilerMessageReporting": {
-			/**
-			 * Configures the default routing for messages that don't match an explicit rule in this table.
-			 */
-			"default": {
-				/**
-				 * Specifies whether the message should be written to the the tool's output log.  Note that
-				 * the "addToApiReportFile" property may supersede this option.
-				 *
-				 * Possible values: "error", "warning", "none"
-				 *
-				 * Errors cause the build to fail and return a nonzero exit code.  Warnings cause a production build fail
-				 * and return a nonzero exit code.  For a non-production build (e.g. when "api-extractor run" includes
-				 * the "--local" option), the warning is displayed but the build will not fail.
-				 *
-				 * DEFAULT VALUE: "warning"
-				 */
-				"logLevel": "warning"
-
-				/**
-				 * When addToApiReportFile is true:  If API Extractor is configured to write an API report file (.api.md),
-				 * then the message will be written inside that file; otherwise, the message is instead logged according to
-				 * the "logLevel" option.
-				 *
-				 * DEFAULT VALUE: false
-				 */
-				// "addToApiReportFile": false
-			}
-
-			// "TS2551": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		},
-
-		/**
-		 * Configures handling of messages reported by API Extractor during its analysis.
-		 *
-		 * API Extractor message identifiers start with "ae-".  For example: "ae-extra-release-tag"
-		 *
-		 * DEFAULT VALUE: See api-extractor-defaults.json for the complete table of extractorMessageReporting mappings
-		 */
-		"extractorMessageReporting": {
-			"default": {
-				"logLevel": "warning"
-				// "addToApiReportFile": false
-			}
-
-			// "ae-extra-release-tag": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		},
-
-		/**
-		 * Configures handling of messages reported by the TSDoc parser when analyzing code comments.
-		 *
-		 * TSDoc message identifiers start with "tsdoc-".  For example: "tsdoc-link-tag-unescaped-text"
-		 *
-		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
-		 */
-		"tsdocMessageReporting": {
-			"default": {
-				"logLevel": "warning"
-				// "addToApiReportFile": false
-			}
-
-			// "tsdoc-link-tag-unescaped-text": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		}
-	}
+	"extends": "../../api-extractor.json"
 }
diff --git a/packages/voice/package.json b/packages/voice/package.json
index 763dde5b7..b1f053582 100644
--- a/packages/voice/package.json
+++ b/packages/voice/package.json
@@ -8,7 +8,7 @@
 		"lint": "prettier --check . && cross-env TIMING=1 eslint src __tests__ --ext .mjs,.js,.ts --format=pretty",
 		"format": "prettier --write . && cross-env TIMING=1 eslint src __tests__ --ext .mjs,.js,.ts --fix --format=pretty",
 		"fmt": "yarn format",
-		"docs": "downlevel-dts dist docs/dist --to=3.7 && api-extractor run --local",
+		"docs": "api-extractor run --local",
 		"prepack": "yarn lint && yarn test && yarn build",
 		"changelog": "git cliff --prepend ./CHANGELOG.md -u -c ./cliff.toml -r ../../ --include-path 'packages/voice/*'",
 		"release": "cliff-jumper"
@@ -67,7 +67,6 @@
 		"@types/jest": "^29.1.2",
 		"@types/node": "16.11.64",
 		"cross-env": "^7.0.3",
-		"downlevel-dts": "^0.10.1",
 		"esbuild-plugin-version-injector": "^1.0.0",
 		"eslint": "^8.25.0",
 		"eslint-config-neon": "^0.1.38",
diff --git a/packages/ws/api-extractor.json b/packages/ws/api-extractor.json
index 3845fd481..bc73f2cc0 100644
--- a/packages/ws/api-extractor.json
+++ b/packages/ws/api-extractor.json
@@ -1,376 +1,3 @@
-/**
- * Config file for API Extractor.  For more info, please visit: https://api-extractor.com
- */
 {
-	"$schema": "https://developer.microsoft.com/json-schemas/api-extractor/v7/api-extractor.schema.json",
-
-	/**
-	 * Optionally specifies another JSON config file that this file extends from.  This provides a way for
-	 * standard settings to be shared across multiple projects.
-	 *
-	 * If the path starts with "./" or "../", the path is resolved relative to the folder of the file that contains
-	 * the "extends" field.  Otherwise, the first path segment is interpreted as an NPM package name, and will be
-	 * resolved using NodeJS require().
-	 *
-	 * SUPPORTED TOKENS: none
-	 * DEFAULT VALUE: ""
-	 */
-	// "extends": "./shared/api-extractor-base.json"
-	// "extends": "my-package/include/api-extractor-base.json"
-
-	/**
-	 * Determines the "<projectFolder>" token that can be used with other config file settings.  The project folder
-	 * typically contains the tsconfig.json and package.json config files, but the path is user-defined.
-	 *
-	 * The path is resolved relative to the folder of the config file that contains the setting.
-	 *
-	 * The default value for "projectFolder" is the token "<lookup>", which means the folder is determined by traversing
-	 * parent folders, starting from the folder containing api-extractor.json, and stopping at the first folder
-	 * that contains a tsconfig.json file.  If a tsconfig.json file cannot be found in this way, then an error
-	 * will be reported.
-	 *
-	 * SUPPORTED TOKENS: <lookup>
-	 * DEFAULT VALUE: "<lookup>"
-	 */
-	// "projectFolder": "..",
-
-	/**
-	 * (REQUIRED) Specifies the .d.ts file to be used as the starting point for analysis.  API Extractor
-	 * analyzes the symbols exported by this module.
-	 *
-	 * The file extension must be ".d.ts" and not ".ts".
-	 *
-	 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-	 * prepend a folder token such as "<projectFolder>".
-	 *
-	 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-	 */
-	"mainEntryPointFilePath": "<projectFolder>/dist/index.d.ts",
-
-	/**
-	 * A list of NPM package names whose exports should be treated as part of this package.
-	 *
-	 * For example, suppose that Webpack is used to generate a distributed bundle for the project "library1",
-	 * and another NPM package "library2" is embedded in this bundle.  Some types from library2 may become part
-	 * of the exported API for library1, but by default API Extractor would generate a .d.ts rollup that explicitly
-	 * imports library2.  To avoid this, we can specify:
-	 *
-	 *   "bundledPackages": [ "library2" ],
-	 *
-	 * This would direct API Extractor to embed those types directly in the .d.ts rollup, as if they had been
-	 * local files for library1.
-	 */
-	"bundledPackages": [],
-
-	/**
-	 * Determines how the TypeScript compiler engine will be invoked by API Extractor.
-	 */
-	"compiler": {
-		/**
-		 * Specifies the path to the tsconfig.json file to be used by API Extractor when analyzing the project.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * Note: This setting will be ignored if "overrideTsconfig" is used.
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/tsconfig.json"
-		 */
-		// "tsconfigFilePath": "<projectFolder>/tsconfig.json",
-		/**
-		 * Provides a compiler configuration that will be used instead of reading the tsconfig.json file from disk.
-		 * The object must conform to the TypeScript tsconfig schema:
-		 *
-		 * http://json.schemastore.org/tsconfig
-		 *
-		 * If omitted, then the tsconfig.json file will be read from the "projectFolder".
-		 *
-		 * DEFAULT VALUE: no overrideTsconfig section
-		 */
-		// "overrideTsconfig": {
-		//   . . .
-		// }
-		/**
-		 * This option causes the compiler to be invoked with the --skipLibCheck option. This option is not recommended
-		 * and may cause API Extractor to produce incomplete or incorrect declarations, but it may be required when
-		 * dependencies contain declarations that are incompatible with the TypeScript engine that API Extractor uses
-		 * for its analysis.  Where possible, the underlying issue should be fixed rather than relying on skipLibCheck.
-		 *
-		 * DEFAULT VALUE: false
-		 */
-		// "skipLibCheck": true,
-	},
-
-	/**
-	 * Configures how the API report file (*.api.md) will be generated.
-	 */
-	"apiReport": {
-		/**
-		 * (REQUIRED) Whether to generate an API report.
-		 */
-		"enabled": false
-
-		/**
-		 * The filename for the API report files.  It will be combined with "reportFolder" or "reportTempFolder" to produce
-		 * a full file path.
-		 *
-		 * The file extension should be ".api.md", and the string should not contain a path separator such as "\" or "/".
-		 *
-		 * SUPPORTED TOKENS: <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<unscopedPackageName>.api.md"
-		 */
-		// "reportFileName": "<unscopedPackageName>.api.md",
-
-		/**
-		 * Specifies the folder where the API report file is written.  The file name portion is determined by
-		 * the "reportFileName" setting.
-		 *
-		 * The API report file is normally tracked by Git.  Changes to it can be used to trigger a branch policy,
-		 * e.g. for an API review.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/"
-		 */
-		// "reportFolder": "<projectFolder>/temp/",
-
-		/**
-		 * Specifies the folder where the temporary report file is written.  The file name portion is determined by
-		 * the "reportFileName" setting.
-		 *
-		 * After the temporary file is written to disk, it is compared with the file in the "reportFolder".
-		 * If they are different, a production build will fail.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/"
-		 */
-		// "reportTempFolder": "<projectFolder>/temp/"
-	},
-
-	/**
-	 * Configures how the doc model file (*.api.json) will be generated.
-	 */
-	"docModel": {
-		/**
-		 * (REQUIRED) Whether to generate a doc model file.
-		 */
-		"enabled": true,
-
-		/**
-		 * The output path for the doc model file.  The file extension should be ".api.json".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/temp/<unscopedPackageName>.api.json"
-		 */
-		"apiJsonFilePath": "<projectFolder>/docs/docs.api.json"
-	},
-
-	/**
-	 * Configures how the .d.ts rollup file will be generated.
-	 */
-	"dtsRollup": {
-		/**
-		 * (REQUIRED) Whether to generate the .d.ts rollup file.
-		 */
-		"enabled": false
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated without any trimming.
-		 * This file will include all declarations that are exported by the main entry point.
-		 *
-		 * If the path is an empty string, then this file will not be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<projectFolder>/dist/<unscopedPackageName>.d.ts"
-		 */
-		// "untrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for an "alpha" release.
-		 * This file will include only declarations that are marked as "@public", "@beta", or "@alpha".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "alphaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-alpha.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "beta" release.
-		 * This file will include only declarations that are marked as "@public" or "@beta".
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "betaTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-beta.d.ts",
-
-		/**
-		 * Specifies the output path for a .d.ts rollup file to be generated with trimming for a "public" release.
-		 * This file will include only declarations that are marked as "@public".
-		 *
-		 * If the path is an empty string, then this file will not be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: ""
-		 */
-		// "publicTrimmedFilePath": "<projectFolder>/dist/<unscopedPackageName>-public.d.ts",
-
-		/**
-		 * When a declaration is trimmed, by default it will be replaced by a code comment such as
-		 * "Excluded from this release type: exampleMember".  Set "omitTrimmingComments" to true to remove the
-		 * declaration completely.
-		 *
-		 * DEFAULT VALUE: false
-		 */
-		// "omitTrimmingComments": true
-	},
-
-	/**
-	 * Configures how the tsdoc-metadata.json file will be generated.
-	 */
-	"tsdocMetadata": {
-		/**
-		 * Whether to generate the tsdoc-metadata.json file.
-		 *
-		 * DEFAULT VALUE: true
-		 */
-		// "enabled": true,
-		/**
-		 * Specifies where the TSDoc metadata file should be written.
-		 *
-		 * The path is resolved relative to the folder of the config file that contains the setting; to change this,
-		 * prepend a folder token such as "<projectFolder>".
-		 *
-		 * The default value is "<lookup>", which causes the path to be automatically inferred from the "tsdocMetadata",
-		 * "typings" or "main" fields of the project's package.json.  If none of these fields are set, the lookup
-		 * falls back to "tsdoc-metadata.json" in the package folder.
-		 *
-		 * SUPPORTED TOKENS: <projectFolder>, <packageName>, <unscopedPackageName>
-		 * DEFAULT VALUE: "<lookup>"
-		 */
-		// "tsdocMetadataFilePath": "<projectFolder>/dist/tsdoc-metadata.json"
-	},
-
-	/**
-	 * Specifies what type of newlines API Extractor should use when writing output files.  By default, the output files
-	 * will be written with Windows-style newlines.  To use POSIX-style newlines, specify "lf" instead.
-	 * To use the OS's default newline kind, specify "os".
-	 *
-	 * DEFAULT VALUE: "crlf"
-	 */
-	"newlineKind": "lf",
-
-	/**
-	 * Configures how API Extractor reports error and warning messages produced during analysis.
-	 *
-	 * There are three sources of messages:  compiler messages, API Extractor messages, and TSDoc messages.
-	 */
-	"messages": {
-		/**
-		 * Configures handling of diagnostic messages reported by the TypeScript compiler engine while analyzing
-		 * the input .d.ts files.
-		 *
-		 * TypeScript message identifiers start with "TS" followed by an integer.  For example: "TS2551"
-		 *
-		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
-		 */
-		"compilerMessageReporting": {
-			/**
-			 * Configures the default routing for messages that don't match an explicit rule in this table.
-			 */
-			"default": {
-				/**
-				 * Specifies whether the message should be written to the the tool's output log.  Note that
-				 * the "addToApiReportFile" property may supersede this option.
-				 *
-				 * Possible values: "error", "warning", "none"
-				 *
-				 * Errors cause the build to fail and return a nonzero exit code.  Warnings cause a production build fail
-				 * and return a nonzero exit code.  For a non-production build (e.g. when "api-extractor run" includes
-				 * the "--local" option), the warning is displayed but the build will not fail.
-				 *
-				 * DEFAULT VALUE: "warning"
-				 */
-				"logLevel": "warning"
-
-				/**
-				 * When addToApiReportFile is true:  If API Extractor is configured to write an API report file (.api.md),
-				 * then the message will be written inside that file; otherwise, the message is instead logged according to
-				 * the "logLevel" option.
-				 *
-				 * DEFAULT VALUE: false
-				 */
-				// "addToApiReportFile": false
-			}
-
-			// "TS2551": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		},
-
-		/**
-		 * Configures handling of messages reported by API Extractor during its analysis.
-		 *
-		 * API Extractor message identifiers start with "ae-".  For example: "ae-extra-release-tag"
-		 *
-		 * DEFAULT VALUE: See api-extractor-defaults.json for the complete table of extractorMessageReporting mappings
-		 */
-		"extractorMessageReporting": {
-			"default": {
-				"logLevel": "warning"
-				// "addToApiReportFile": false
-			}
-
-			// "ae-extra-release-tag": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		},
-
-		/**
-		 * Configures handling of messages reported by the TSDoc parser when analyzing code comments.
-		 *
-		 * TSDoc message identifiers start with "tsdoc-".  For example: "tsdoc-link-tag-unescaped-text"
-		 *
-		 * DEFAULT VALUE:  A single "default" entry with logLevel=warning.
-		 */
-		"tsdocMessageReporting": {
-			"default": {
-				"logLevel": "warning"
-				// "addToApiReportFile": false
-			}
-
-			// "tsdoc-link-tag-unescaped-text": {
-			//   "logLevel": "warning",
-			//   "addToApiReportFile": true
-			// },
-			//
-			// . . .
-		}
-	}
+	"extends": "../../api-extractor.json"
 }
diff --git a/packages/ws/package.json b/packages/ws/package.json
index 68b57da10..b6a920ddc 100644
--- a/packages/ws/package.json
+++ b/packages/ws/package.json
@@ -7,7 +7,7 @@
 		"build": "tsup",
 		"lint": "prettier --check . && cross-env TIMING=1 eslint src __tests__ --ext .mjs,.js,.ts --format=pretty",
 		"format": "prettier --write . && cross-env TIMING=1 eslint src __tests__ --ext .mjs,.js,.ts --fix --format=pretty",
-		"docs": "downlevel-dts dist docs/dist --to=3.7 && api-extractor run --local",
+		"docs": "api-extractor run --local",
 		"prepack": "yarn build && yarn lint",
 		"changelog": "git cliff --prepend ./CHANGELOG.md -u -c ./cliff.toml -r ../../ --include-path 'packages/ws/*'",
 		"release": "cliff-jumper"
@@ -68,7 +68,6 @@
 		"@types/node": "16.11.64",
 		"@vitest/coverage-c8": "^0.24.1",
 		"cross-env": "^7.0.3",
-		"downlevel-dts": "^0.10.1",
 		"esbuild-plugin-version-injector": "^1.0.0",
 		"eslint": "^8.25.0",
 		"eslint-config-neon": "^0.1.38",
diff --git a/yarn.lock b/yarn.lock
index c9c4beeaa..85fcbd714 100644
--- a/yarn.lock
+++ b/yarn.lock
@@ -2040,7 +2040,6 @@ __metadata:
     "@vitest/coverage-c8": ^0.24.1
     cross-env: ^7.0.3
     discord-api-types: ^0.37.12
-    downlevel-dts: ^0.10.1
     esbuild-plugin-version-injector: ^1.0.0
     eslint: ^8.25.0
     eslint-config-neon: ^0.1.38
@@ -2064,7 +2063,6 @@ __metadata:
     "@types/node": 16.11.64
     "@vitest/coverage-c8": ^0.24.1
     cross-env: ^7.0.3
-    downlevel-dts: ^0.10.1
     esbuild-plugin-version-injector: ^1.0.0
     eslint: ^8.25.0
     eslint-config-neon: ^0.1.38
@@ -2202,7 +2200,6 @@ __metadata:
     "@types/supertest": ^2.0.12
     "@vitest/coverage-c8": ^0.24.1
     cross-env: ^7.0.3
-    downlevel-dts: ^0.10.1
     eslint: ^8.25.0
     eslint-config-neon: ^0.1.38
     eslint-formatter-pretty: ^4.1.0
@@ -2230,7 +2227,6 @@ __metadata:
     "@vitest/coverage-c8": ^0.24.1
     cross-env: ^7.0.3
     discord-api-types: ^0.37.12
-    downlevel-dts: ^0.10.1
     esbuild-plugin-version-injector: ^1.0.0
     eslint: ^8.25.0
     eslint-config-neon: ^0.1.38
@@ -2310,7 +2306,6 @@ __metadata:
     "@types/node": 16.11.64
     "@vitest/coverage-c8": ^0.24.1
     cross-env: ^7.0.3
-    downlevel-dts: ^0.10.1
     eslint: ^8.25.0
     eslint-config-neon: ^0.1.38
     eslint-formatter-pretty: ^4.1.0
@@ -2336,7 +2331,6 @@ __metadata:
     "@types/ws": ^8.5.3
     cross-env: ^7.0.3
     discord-api-types: ^0.37.12
-    downlevel-dts: ^0.10.1
     esbuild-plugin-version-injector: ^1.0.0
     eslint: ^8.25.0
     eslint-config-neon: ^0.1.38
@@ -2427,7 +2421,6 @@ __metadata:
     "@vladfrangu/async_event_emitter": ^2.1.2
     cross-env: ^7.0.3
     discord-api-types: ^0.37.12
-    downlevel-dts: ^0.10.1
     esbuild-plugin-version-injector: ^1.0.0
     eslint: ^8.25.0
     eslint-config-neon: ^0.1.38
@@ -8251,19 +8244,6 @@ __metadata:
   languageName: node
   linkType: hard
 
-"downlevel-dts@npm:^0.10.1":
-  version: 0.10.1
-  resolution: "downlevel-dts@npm:0.10.1"
-  dependencies:
-    semver: ^7.3.2
-    shelljs: ^0.8.3
-    typescript: next
-  bin:
-    downlevel-dts: index.js
-  checksum: d66fe88fdd6e2309fbec1fe57f2697bb3d925db2d1a9e5ed2c8d58adf1bc6f9ead44e8bd5d484179d3ee84f110b9bfed8abda63867d8418515a61daedccbbee4
-  languageName: node
-  linkType: hard
-
 "dset@npm:^3.1.2":
   version: 3.1.2
   resolution: "dset@npm:3.1.2"
@@ -10856,7 +10836,7 @@ __metadata:
   languageName: node
   linkType: hard
 
-"glob@npm:^7.0.0, glob@npm:^7.1.1, glob@npm:^7.1.3, glob@npm:^7.1.4, glob@npm:^7.1.6, glob@npm:~7.2.0":
+"glob@npm:^7.1.1, glob@npm:^7.1.3, glob@npm:^7.1.4, glob@npm:^7.1.6, glob@npm:~7.2.0":
   version: 7.2.3
   resolution: "glob@npm:7.2.3"
   dependencies:
@@ -11802,13 +11782,6 @@ __metadata:
   languageName: node
   linkType: hard
 
-"interpret@npm:^1.0.0":
-  version: 1.4.0
-  resolution: "interpret@npm:1.4.0"
-  checksum: 2e5f51268b5941e4a17e4ef0575bc91ed0ab5f8515e3cf77486f7c14d13f3010df9c0959f37063dcc96e78d12dc6b0bb1b9e111cdfe69771f4656d2993d36155
-  languageName: node
-  linkType: hard
-
 "invariant@npm:^2.2.4":
   version: 2.2.4
   resolution: "invariant@npm:2.2.4"
@@ -16818,15 +16791,6 @@ __metadata:
   languageName: node
   linkType: hard
 
-"rechoir@npm:^0.6.2":
-  version: 0.6.2
-  resolution: "rechoir@npm:0.6.2"
-  dependencies:
-    resolve: ^1.1.6
-  checksum: fe76bf9c21875ac16e235defedd7cbd34f333c02a92546142b7911a0f7c7059d2e16f441fe6fb9ae203f459c05a31b2bcf26202896d89e390eda7514d5d2702b
-  languageName: node
-  linkType: hard
-
 "recrawl-sync@npm:^2.0.3":
   version: 2.2.2
   resolution: "recrawl-sync@npm:2.2.2"
@@ -17301,7 +17265,7 @@ __metadata:
   languageName: node
   linkType: hard
 
-"resolve@npm:^1.1.6, resolve@npm:^1.10.0, resolve@npm:^1.14.2, resolve@npm:^1.17.0, resolve@npm:^1.20.0, resolve@npm:^1.22.0, resolve@npm:^1.22.1, resolve@npm:^1.3.2":
+"resolve@npm:^1.10.0, resolve@npm:^1.14.2, resolve@npm:^1.17.0, resolve@npm:^1.20.0, resolve@npm:^1.22.0, resolve@npm:^1.22.1, resolve@npm:^1.3.2":
   version: 1.22.1
   resolution: "resolve@npm:1.22.1"
   dependencies:
@@ -17346,7 +17310,7 @@ __metadata:
   languageName: node
   linkType: hard
 
-"resolve@patch:resolve@^1.1.6#~builtin<compat/resolve>, resolve@patch:resolve@^1.10.0#~builtin<compat/resolve>, resolve@patch:resolve@^1.14.2#~builtin<compat/resolve>, resolve@patch:resolve@^1.17.0#~builtin<compat/resolve>, resolve@patch:resolve@^1.20.0#~builtin<compat/resolve>, resolve@patch:resolve@^1.22.0#~builtin<compat/resolve>, resolve@patch:resolve@^1.22.1#~builtin<compat/resolve>, resolve@patch:resolve@^1.3.2#~builtin<compat/resolve>":
+"resolve@patch:resolve@^1.10.0#~builtin<compat/resolve>, resolve@patch:resolve@^1.14.2#~builtin<compat/resolve>, resolve@patch:resolve@^1.17.0#~builtin<compat/resolve>, resolve@patch:resolve@^1.20.0#~builtin<compat/resolve>, resolve@patch:resolve@^1.22.0#~builtin<compat/resolve>, resolve@patch:resolve@^1.22.1#~builtin<compat/resolve>, resolve@patch:resolve@^1.3.2#~builtin<compat/resolve>":
   version: 1.22.1
   resolution: "resolve@patch:resolve@npm%3A1.22.1#~builtin<compat/resolve>::version=1.22.1&hash=07638b"
   dependencies:
@@ -17898,19 +17862,6 @@ __metadata:
   languageName: node
   linkType: hard
 
-"shelljs@npm:^0.8.3":
-  version: 0.8.5
-  resolution: "shelljs@npm:0.8.5"
-  dependencies:
-    glob: ^7.0.0
-    interpret: ^1.0.0
-    rechoir: ^0.6.2
-  bin:
-    shjs: bin/shjs
-  checksum: 7babc46f732a98f4c054ec1f048b55b9149b98aa2da32f6cf9844c434b43c6251efebd6eec120937bd0999e13811ebd45efe17410edb3ca938f82f9381302748
-  languageName: node
-  linkType: hard
-
 "shiki@npm:^0.10.1":
   version: 0.10.1
   resolution: "shiki@npm:0.10.1"
@@ -19787,16 +19738,6 @@ __metadata:
   languageName: node
   linkType: hard
 
-"typescript@npm:next":
-  version: 4.9.0-dev.20221007
-  resolution: "typescript@npm:4.9.0-dev.20221007"
-  bin:
-    tsc: bin/tsc
-    tsserver: bin/tsserver
-  checksum: cc884ebc83dc0fc5ac41aae643aed845d5b92fefb675865535e4e747e8caeed8b05e63ea3af64d5642269d0538ef4a3465a19520e58e8f5ae98d144c07b046d4
-  languageName: node
-  linkType: hard
-
 "typescript@patch:typescript@*#~builtin<compat/typescript>, typescript@patch:typescript@^4.6.4#~builtin<compat/typescript>, typescript@patch:typescript@^4.8.4#~builtin<compat/typescript>, typescript@patch:typescript@~4.8.4#~builtin<compat/typescript>":
   version: 4.8.4
   resolution: "typescript@patch:typescript@npm%3A4.8.4#~builtin<compat/typescript>::version=4.8.4&hash=701156"
@@ -19817,16 +19758,6 @@ __metadata:
   languageName: node
   linkType: hard
 
-"typescript@patch:typescript@next#~builtin<compat/typescript>":
-  version: 4.9.0-dev.20221007
-  resolution: "typescript@patch:typescript@npm%3A4.9.0-dev.20221007#~builtin<compat/typescript>::version=4.9.0-dev.20221007&hash=701156"
-  bin:
-    tsc: bin/tsc
-    tsserver: bin/tsserver
-  checksum: 203466ce1943a86bcaa46ce8db7acfcdc8898758e73bc6b083422de34d47dbb16bb6a783154e00fd56196002c6e33ef653b63a968c428b62ec2b17369e3f0fff
-  languageName: node
-  linkType: hard
-
 "typical@npm:^2.4.2, typical@npm:^2.6.0, typical@npm:^2.6.1":
   version: 2.6.1
   resolution: "typical@npm:2.6.1"